PT. Saipem Indonesia; 8 Positions

Saipem is a leading company in engineering, drilling and construction of major projects in the energy and infrastructure sectors. It is “One-Company” organized in five business divisions (Offshore E&C, Onshore E&C, Offshore Drilling, Onshore Drilling and XSight, dedicated to conceptual design).

Saipem is a global solution provider with distinctive skills and competences and high-tech assets, which it uses to identify solutions aimed at satisfying customer requirements. Listed on the Milan Stock Exchange, it is present in over 60 countries worldwide and has 32 thousand employees of 120 different nationalities.

We are seeking for best candidates to fill the vacant position:

1. POSITION  : OFFSHORE STRUCTURAL ENGINEER

Department/Project : Offshore Engineering (STRUCTURAL)

Education  : University Graduate on Technical Major

Working Experiences : More than 8 years in similar position or similar field

Working Status  : Temporary / Contract

Duration   : 3-6 Months

Work location   : Jakarta

REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION

• Basic knowledge of structural engineering design criteria, methods and workflows from conceptual phase up to site engineering phase. Capability to define technical documents set based on project quantities and scope of work. Capability to perform and coordinate project engineering documents productions activities and to check and review design documents, prepare either internally or by vendors.

• Capability to write comprehensive technical reports with clear indication of basic data, assumptions, limitations, references, tracing of calculation, summary and conclusion.

• Deep knowledge on using SACS software. Able to develop SACS model of all type of offshore structure including but not limited to geometry, boundary conditions, materials, marine growth and corrosion, added mass, loads (gravity, environmental, live loads, etc), and other offshore specific parameters.

• Basic knowledge of main international structural standards, codes, and regulations. Capability to analyse dedicated project requirements in terms of local standards and codes and to identify proper implementation actions.

• Capability to predict and understand the static and dynamic behaviour of complex steel structures typical of the offshore industry. Able to propose proper action or modification to the structure being analysed in order to improve or optimize the structure.

• Basic knowledge of the key issues related to yard fabrication and erection activities, load out, sea transport and offshore installation of jackets, decks, modules and offshore buildings.

BRIEF JOB DESCRIPTIONS

1. Perform technical tasks assigned by the project structural lead, related with structural analyses, design, verification, or study activities.

2. Liaise with other Project Specialists and Designers whenever required for a proper completion of the work assigned.

3. Design structural systems and components, pursuing objectives of sound engineering and design optimization in term of costs, fabrication simplicity, constructability and safety.

4. Carry out/Check/Supervise structural analyses.

5. Supervise/Approve steel structures design drawings.

6. Supervise setting up of bill of quantities or material take off (MTO).

7. Prepare, when required, specifications for structural fabrications and all related items such as bearing systems, bolts, cladding, grating, etc.

8. Verify structural strength or dynamic behaviour of items designed by others (piping support, Specialists, Vendors, technical building Suppliers, etc.)

9. Apply the Quality Control Procedure of the Offshore Structural Department during the work assigned.

10. Implement field engineering activities.

11. Write design reports and calculation notes

2. POSITION  : STRUCTURAL TEKLA DESIGNERS

Department/Project : Offshore Engineering (STRUCTURAL)

Education  : University Graduate on Technical Major

Working Experiences : More than 8 years in similar position or similar field

Working Status  : Temporary / Contract

Duration   : 3-6 Months

Work location   : Jakarta

REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION

• Knowledge of tools related to 2D and 3D modelling activities and specific knowledge of drafting drawing techniques

• Knowledge of main international Discipline standards, codes and regulations.

• General knowledge of the main typologies of offshore structures.

• Knowledge of tools to prepare bill of material and/or material take off.

BRIEF JOB DESCRIPTIONS

1. Perform 2D drafting tasks and 3D TEKLA modeling tasks assigned by Offshore Structural Project Specialist Lead, Engineers and Designer Coordinator within schedule and with due respect to Quality requirements related with design, verification, testing or study activities.

2. Prepare bill of materials and/or material take off based on data either from 2D drawings or extracted from 3D TEKLA model.

3. POSITION  : AUTOMATION ENGINEER

Department/Project : Offshore Engineering (INSTRUMENT)

Education  : University Graduate on Technical Major

Working Experiences : More than 5 years in similar position or similar field

Working Status  : Temporary / Contract

Duration   : 3-6 Months

Work location   : Jakarta

REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION

• [SK1004003] Engineering design activities, Knowledge of Discipline engineering design criteria, methods and workflows from conceptual phase up to site engineering phase. Capability to define the technical documents set based on Project quantities and scope of work. Capability to perform and coordinate Project engineering documents production activities and to check and review design documents, prepared either internally or by Vendors.

• [SK1004007] Engineering standard codes and regulations, Knowledge of main international Discipline standards, codes and regulations. Capability to analyse dedicated Project requirements in terms of local standards and codes and to identify proper implementation actions.

When required by the role, ability to manage the resolution of Engineering Non-Conformity (NCR) at site supporting Construction and / or Fabrication activities effectively interfacing project Team, Client and Vendor.

• [SK1004010] Process engineering design, Knowledge of process engineering design. Understanding process documents as applicable including process descriptions, process data sheets, PFD, P and ID.

• [SK1004013] Quantity estimation for engineering disciplines, Capability to define the Project general rules and guidelines for Discipline quantities estimation either on Bid Projects or on Projects in execution, according to Corporate design standards, procedures, methods and tools. Capability to control and ensure the correct application of the general rules and guidelines by all team members and all subcontractors involved in quantity definition activities

• [SK1005003] Engineering man-hours and cost budget planning and monitoring, Capability to estimate Discipline Work Orders and Bid Projects engineering man-hours budget based on the Project quantities and scope of work according to Corporate standards, procedures, methods and tools. Capability to estimate Discipline items costs budget based on Project quantities and technical requirements according to Corporate standards, procedures, methods and tools. Capability to monitor the relevant activity progress and the actual man-hours spent vs the earned progress

• [SK1005006] Engineering project documents management, Capability to analyse engineering documents (e.g. Instruction to Tender, Saipem and subcontractor documents, etc.) identifying improvement areas in terms of cost/time optimisation

• [SK1005007] Engineering reporting techniques, Capability to monitor and control the engineering progress and schedule

Contribute to Project reporting for the relevant engineering part

• [SK1005008] Engineering Subcontractor management and control, Capability to handle subcontracted engineering work packages defining the scope of work, the milestones and documentation deliverables. Capability to control the quality, the costs and the timing of the subcontracted activities ensuring the compliance with project scheduling and goals and with contract requirements

• [SK1005009] Engineering technical bid evaluation, Capability to perform technical evaluation of vendor bids with reference to Discipline items, bulk material and subcontracted work packages, according to Corporate standards and procedures

• [SK1005010] Technical proposal preparation, Capability to prepare and coordinate the preparation of Discipline technical proposal documents for Bid Projects according to Tender contractual requirements

• [SK1006003] Engineering technical software tools, User level knowledge of Corporate and Operating Center Discipline technical design software tools. User level knowledge of Corporate and Operating Center IT tools supporting business processes such as electronic document system management, procurement and office automation applications

• [SK1006006] P and IDs mechanisation, Capability to design and coordinate P&IDs for related systems. Full knowledge of Discipline workflow and of Discipline mechanisation procedures and criteria. Full knowledge of Discipline P&IDs mechanisation battery limits

• [SK1007001] Engineering equipment testing, Capability to define technical requirements for Discipline equipment and materials workshop testing according to Corporate standards, procedures, methods and tools

• [SK1007002] Engineering Material Testing, Capability to define technical requirements for Discipline equipment and materials workshop testing according to Corporate standards, procedures, methods and tools

• [SK1303005] HSE Work Practices, Knowledge of the main risks during the operation activities and safe working and environmental protection procedures/practices & rules to be applied. Knowledge of adequate Personal Protective Equipment - purpose, use and maintenance Knowledge and the correct use of Permit to Work system.

• [SK2701014] Project materials post order management, Knowledge of supply chain process (engineering, purchasing, production and fabrications, assembling, packing, transportation, clearing through customs, preservation and installation). Ability to focus on Project objectives and Purchase Order requirements in terms of performance, quantities and quality characteristics, time schedule and cost (expediting, quality control during manufacturing stages, shipping and customs activities of purchased goods). Ability to planning, coordinating, executing, monitoring and improving post order process for goods.

BRIEF JOB DESCRIPTIONS

• Review Client technical documentation and requirements

• Coordinate subcontracted engineering activities and control subcontracted engineering documents

• Define engineering design basis and guidelines

• Prepare the technical documentation for Control Systems material and services requisitions and prepare, according to internal procedures, the technical evaluations

• Provide technical support to Project Team

• Optimize Control, Safety Systems design ensuring minimal cost and complexity in compliance with the contractual and safety requirements

• Prepare Control and Safety Systems supply specifications

• Prepare Advanced Control, Dynamic Simulation and Operator Training Simulator functional and supply specifications

• Participate to P and ID mechanization

• Validate Vendor Control and Safety Systems functional design specifications and participate to detail configuration

• documents definition

• Validate Vendor Control Systems BOQs

• Coordinate detail engineering activities and ensure proper installation drawings definition

• Participates to F.A.T. activities ad Vendor workshop

A. Construction and start up

• Participate to Site Acceptance Test, loop checks and functional checks

• Provide technical and engineering support to construction Team

• Perform site engineering activities during construction and commissioning phases

4. POSITION  : INSTRUMENT DESIGNERS

Department/Project : Offshore Engineering (INSTRUMENT)

Education  : Min Senior High School or D3

Working Experiences : More than 5 years in similar position specially in Oil & Gas

Working Status  : Temporary / Contract

Duration   : 3-6 Months

REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION

• Knowledge and ability of tools related to 2D and 3D modelling activities and specific knowledge of drafting drawing techniques. Specialty for 3D is preferably

• Familiar to INSTRUMENT/AUTOMATION ENGINEERING as DESIGNER

• Work Experience on OIL & GAS ENGINEERING COMPANY

• Work experience with Instrument/Automation Drawing, MTO, SPI wiring, SPI hook-up, SPI Installation Detail, SP3D Model, Involved in the 3D review, etc.

• Able to work under supervise & instruction from Engineer, PSL/HOD and work with other discipline as team.

BRIEF JOB DESCRIPTIONS

• Instrument/ /Automation/Telecom ENGINEERING will be done at Jakarta.

5. POSITION  : INSTRUMENT ENGINEER (3 POSITION)

Department/Project : Offshore Engineering (INSTRUMENT)

Education  : University Graduate on Technical Major

Working Experiences : More than 5 years in similar position or similar field

Working Status  : Temporary / Contract

Duration   : 3-6 Months

REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION

• Familiar to INSTRUMENT ENGINEERING as ENGINEER

• Work Experience on OIL & GAS ENGINEERING COMPANY

• Work experience with I/O list, Caused Effect Matric, Control Narrative, ICSS Specification, Vendor follow-up, Telecom interface, Mechanical interface, Involved in the P&ID Review, 3D review, etc.

• Able to work under supervise & instruction from PSL/HOD and work with other discipline as team.

• [SK1004003] - Knowledge of Discipline engineering design criteria, methods and workflows from conceptual phase up to site engineering phase. Capability to define the technical documents set based on Project quantities and scope of work. Capability to perform and coordinate Project engineering documents production activities and to check and review design documents, prepared either internally or by Vendors.

• [SK1004007] – Knowledge of main international Discipline standards, codes and regulations. Capability to analyze dedicated Project requirements in terms of local standards and codes and to identify proper implementation actions. When required by the role, ability to manage the resolution of Engineering Non-Conformity (NCR) at site supporting Construction and / or Fabrication activities effectively interfacing project Team, Client and Vendor.

• [SK1004013] – Capability to define the Project general rules and guidelines for Discipline quantities estimation either on Bid Projects or on Projects in execution, according to Corporate design standards, procedures, methods and tools. Capability to control and ensure the correct application of the general rules and guidelines by all team members and all subcontractors involved in quantity definition activities.

• [SK1005003] – Capability to estimate Discipline Work Orders and Bid Projects engineering man-hours budget based on the Project quantities and scope of work according to Corporate standards, procedures, methods and tools. Capability to estimate Discipline items costs budget based on Project quantities and technical requirements according to Corporate standards, procedures, methods and tools. Capability to monitor the relevant activity progress and the actual manhours spent vs the earned progress

• [SK1005006] - Capability to analyse engineering documents (e.g. Instruction to Tender, Saipem and subcontractor documents, etc.) identifying improvement areas in terms of cost/time optimization.

• [SK1005007] - Capability to monitor and control the engineering progress and schedule Contribute to Project reporting for the relevant engineering part.

• [SK1005008] - Capability to handle subcontracted engineering work packages defining the scope of work, the milestones and documentation deliverables. Capability to control the quality, the costs and the timing of the subcontracted activities ensuring the compliance with project scheduling and goals and with contract requirements.

• [SK1005009] -  Capability to perform technical evaluation of vendor bids with reference to Discipline items, bulk material and subcontracted work packages, according to Corporate standards and procedures.

• [SK1005010] -  Capability to prepare and coordinate the preparation of Discipline technical proposal documents for Bid Projects according to Tender contractual requirements.

• [SK1005011] - Capability to keep under control the budget of the Vendors site assistance and manage the vendors at site.

• [SK1006001] - Knowledge of tools related to 2D and 3D modelling activities.

• [SK1006003] - User level knowledge of Corporate and Operating Center Discipline technical design software tools. User level knowledge of Corporate and Operating Center IT tools supporting business processes such as electronic document system management, procurement and office automation applications.

• [SK1006006] - Capability to design and coordinate P&IDs for related systems. Full knowledge of Discipline workflow and of Discipline mechanization procedures and criteria. Full knowledge of Discipline P&IDs mechanization battery limits.

• [SK1007001] - Capability to define technical requirements for Discipline equipment and materials workshop testing according to Corporate standards, procedures, methods and tools.

• [SK1007002] - Capability to define technical requirements for Discipline equipment and materials workshop testing according to Corporate standards, procedures, methods and tools.

• [SK1303005] - Knowledge of the main risks during the operation activities and safe working and environmental protection procedures/practices & rules to be applied. Knowledge of adequate Personal Protective Equipment - purpose, use and maintenance Knowledge and the correct use of Permit to Work system.

• [SK2701014] - Knowledge of supply chain process (engineering, purchasing, production and fabrications, assembling, packing, transportation, clearing through customs, preservation and installation). Ability to focus on Project objectives and Purchase Order requirements in terms of performance, quantities and quality characteristics, time schedule and cost (expediting, quality control during manufacturing stages, shipping and customs activities of purchased goods). Ability to planning, coordinating, executing, monitoring and improving post order process for goods.

BRIEF JOB DESCRIPTIONS

• Coordinate subcontracted engineering activities and control subcontracted engineering documents

• Define engineering design basis and guidelines

• Prepare the technical documentation for Instrumentation elements material and services requisitions and prepare, according to internal procedures, the technical evaluations

• Provide technical support to Project Team

• Optimize Instrumentation design ensuring minimal cost and complexity in compliance with the contractual and safety requirements

• Prepare Instrumentation technical specifications

• Prepare Instrumentation data sheets

• Prepare Instrumentation installation specifications and drawings

• Prepare Instrumentation BOQs and MTOs

• Participate to P and ID mechanization

• Validate Vendor control valves and safety valves sizing calculations

• Validate Vendor measurements elements sizing calculations

• Coordinate engineering activities

• Ensure Instrumentation 3D modeling design activities

• Participate to F.A.T. activities ad Vendor workshop

A. Construction and start up

• Provide technical and engineering support to construction Team

• Perform site engineering activities during construction and commissioning phases

6. POSITION  : ELECTRICAL ENGINEER

Department/Project  : Offshore Engineering (Electrical)

Education   : University Graduate on Technical Major

Working Experiences : More than 5 years in similar position or similar field

Working Status  : Temporary / Contract

Duration    : 3-6 Months

Work location   : Jakarta

REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION

o Knowledge of Engineering standard, codes and regulations

o Capability to perform Electrical Systems calculation and studies.

o Capability to design electrical systems (power generation and distribution, grounding, lighting, etc.)

o Knowledge of Discipline engineering design criteria, method, and workflows from conceptual phase up to site engineering phase. Capability to define the technical documents set based on Project quantities and scope of work.  

o Capability to perform and coordinate Project engineering documents production activities and to check and review design documents, prepared either internally or by Vendors Engineering design and document review.

o Capability to perform technical evaluation of vendor bids with reference to Discipline items, bulk materials, and subcontracted work packages, according to Corporate standards and procedure.

o Having experience in construction activities.

o [SK1003001] Electrical Systems calculation and study, Capability to perform electrical system calculations and studies (power demand, load flow, short circuit, transient stability, motor starting, harmonics, power cables sizing, grounding, illumination levels) to define systems and equipment ratings by means of Corporate and Operating Centre Discipline technical design software tools

o [SK1003002] Electrical systems configuration definition, Capability to define the functional philosophies for the electrical system automatic control and monitoring

o (power management, synchronization, load shedding, reacceleration and restarting). Knowledge of electrical monitoring and control systems architecture and relevant hardware devices and communication protocols

o [SK1004003] Engineering design activities, Knowledge of Discipline engineering design criteria, methods and workflows from conceptual phase up to site engineering phase. Capability to define the technical documents set based on Project quantities and scope of work. Capability to perform and coordinate Project engineering documents production activities and to check and review design documents, prepared either internally or by Vendors.

o [SK1004007] Engineering standard codes and regulations, Knowledge of main international Discipline standards, codes and regulations. Capability to analyse dedicated Project requirements in terms of local standards and codes and to identify proper implementation actions.

o When required by the role, ability to manage the resolution of Engineering Non Conformity (NCR) at site supporting Construction and / or Fabrication activities effectively interfacing project Team, Client and Vendor.

o [SK1004013] Quantity estimation for engineering disciplines, Capability to define the Project general rules and guidelines for Discipline quantities estimation either on Bid Projects or on Projects in execution, according to Corporate design standards, procedures, methods and tools. Capability to control and ensure the correct application of the general rules and guidelines by all team members and all subcontractors involved in quantity definition activities

o [SK1005003] Engineering man-hours and cost budget planning and monitoring, Capability to estimate Discipline Work Orders and Bid Projects engineering man-hours budget based on the Project quantities and scope of work according to Corporate standards, procedures, methods and tools. Capability to estimate Discipline items costs budget based on Project quantities and technical requirements according to Corporate standards, procedures, methods and tools. Capability to monitor the relevant activity progress and the actual man-hours spent vs the earned progress

o [SK1005006] Engineering project documents management, Capability to analyse engineering documents (e.g. Instruction to Tender, Saipem and subcontractor documents, etc.) identifying improvement areas in terms of cost/time optimisation

o [SK1005007] Engineering reporting techniques, Capability to monitor and control the engineering progress and schedule

o Contribute to Project reporting for the relevant engineering part

o [SK1005008] Engineering Subcontractor management and control, Capability to handle subcontracted engineering work packages defining the scope of work, the milestones and documentation deliverables. Capability to control the quality, the costs and the timing of the subcontracted activities ensuring the compliance with project scheduling and goals and with contract requirements

o [SK1005009] Engineering technical bid evaluation, Capability to perform technical evaluation of vendor bids with reference to Discipline items, bulk material and subcontracted work packages, according to Corporate standards and procedures

o [SK1005010] Technical proposal preparation, Capability to prepare and coordinate the preparation of Discipline technical proposal documents for Bid Projects according to Tender contractual requirements\

o [SK1005011] Vendors Management, Capability to keep under control the budget of the Vendors site assistance and manage the vendors at site

o [SK1006001] 2D and 3D modelling, Knowledge of tools related to 2D and 3D modelling activities.

o [SK1006003] Engineering technical software tools, User level knowledge of Corporate and Operating Center Discipline technical design software tools. User level knowledge of Corporate and Operating Center IT tools supporting business processes such as electronic document system management, procurement and office automation applications

o [SK1007001] Engineering equipment testing, Capability to define technical requirements for Discipline equipment and materials workshop testing according to Corporate standards, procedures, methods and tools

o [SK1007002] Engineering Material Testing, Capability to define technical requirements for Discipline equipment and materials workshop testing according to Corporate standards, procedures, methods and tools

o [SK1303005] HSE Work Practices, Knowledge of the main risks during the operation activities and safe working and environmental protection procedures/practices & rules to be applied. Knowledge of adequate Personal Protective Equipment - purpose, use and maintenance Knowledge and the correct use of Permit to Work system.

BRIEF JOB DESCRIPTIONS

• Electrical Engineer

• Take part in definition of electrical engineering requirements

• Prepare Project design criteria for electrical system

• Define the configuration of the electrical system and the single line diagram

• Perform electrical system calculation and studies (e.g., power demand, load flow, short circuit, transient stability, motor starting) to define the equipment rating

• Prepare relay and metering schemes, protective relays coordination study and setting tables

• Define the functional philosophies for the electrical system control (power management, synchronization, load shedding, reacceleration and restarting) and control system architecture

• Prepare technical documentation (e.g., specifications, data sheets) for electrical equipment and materials

• Check and review technical documentation according to Project and Saipem procedure

• Prepare Purchase Requisitions and bids technical evaluation

• Perform check and review of Vendor technical documentation

• Provide technical support to Procurement in purchasing and to Post order in expediting and testing

• Develop electrical system plant design (e.g., cable routings, grounding) and substations arrangements

• Perform power cables sizing

• Define typical installation details, bulk materials selection and take off (MTOs)

7. POSITION  : ELECTRICAL DESIGNER

Department/Project  : Offshore Engineering (Electrical)

Education   : Min Senior High School or D3

Working Experiences : More than 5 years in similar position or similar field

Working Status  : Temporary / Contract

Duration    : 3-6 Months

Work location   : Jakarta

REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION

• [SK1003005] Power cables design, Full knowledge of the design criteria to define the power cables selection in relation to the different connected users and the various laying conditions. Capability to perform electrical power cables sizing by means of Corporate and Operating Center Discipline technical design software tools

• [SK1004003] Engineering design activities, Knowledge of Discipline engineering design criteria, methods and workflows from conceptual phase up to site engineering phase. Capability to define the technical documents set based on Project quantities and scope of work. Capability to perform and coordinate Project engineering documents production activities and to check and review design documents, prepared either internally or by Vendors.

• [SK1004006] Engineering project quantity management, Knowledge of workflows and methods to define project quantities in order to:

- ensure the compliance with hours and material budgets

- manage potential deviations, defining the appropriate corrective actions in compliance with contractual requirements and project objectives

• [SK1004007] Engineering standard codes and regulations, Knowledge of main international Discipline standards, codes and regulations. Capability to analyse dedicated Project requirements in terms of local standards and codes and to identify proper implementation actions.

When required by the role, ability to manage the resolution of Engineering Non Conformity (NCR) at site supporting Construction and / or Fabrication activities effectively interfacing project Team, Client and Vendor.

• [SK1006001] 2D and 3D modelling, Knowledge of tools related to 2D and 3D modelling activities.

• [SK1006003] Engineering technical software tools, User level knowledge of Corporate and Operating Center Discipline technical design software tools. User level knowledge of Corporate and Operating Center IT tools supporting business processes such as electronic document system management, procurement and office automation applications

• [SK1303005] HSE Work Practices, Knowledge of the main risks during the operation activities and safe working and environmental protection procedures/practices & rules to be applied. Knowledge of adequate Personal Protective Equipment - purpose, use and maintenance Knowledge and the correct use of Permit to Work system.

Contribute to Project reporting for the relevant engineering part

BRIEF JOB DESCRIPTIONS

• Analyse and understand Tender technical requirements for electrical systems

• Take part in electrical system design review

• Identify technical queries, deviations and alternatives to be submitted

• Implement bidding methodologies, design criteria and guidelines

• Define and issue Request for quotation for electrical materials not estimated in house

• Prepare material quantities and weights (MTOs) for estimation

• Prepare bill of quantities (BOQ) for erection works cost estimation

• D-Project Execution (Job progress and completion)

• Review Client technical documentation and requirements

• Take part in definition of electrical system plant design requirements

• Prepare technical documentation (specifications, data sheets, inspection data sheets) for electrical bulk materials

• Check and review technical documentation according to Project and Saipem procedures

• Prepare Purchase Requisitions and bids technical evaluation for electrical bulk materials

• Perform check and review of Vendor technical documentation for electrical bulk materials

• Develop electrical system plant design (cable routings, grounding, lighting and tracing layouts) and substations arrangements in 2D or 3D

• Perform power cables sizing

• Take part in definition of typical installation details and bulk materials selection

• Prepare electrical materials take off (MTOs)

• Prepare bill of quantities for electrical system installation

• Participate to 3D Modelling plant review

• E-Construction and start up

• Support Construction for electrical system installation works and bulk materials management

• Assist, when necessary, engineering adjustment and define modification

• Review as built the technical documentation

8. POSITION: PAINTING AND COATING ENGINEER  (429711)

Department/Project: Offshore Engineering – Material and Corrosion  

Education: University Graduate on Technical Major

Working Experiences: More than 5 years in similar position specially in Oil & Gas

Working Status: Temporary / Contract

REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION

• Education background Material or Metallurgy Engineering

• Familiar with Coating Engineering, Inspection and application

• Familiar with international standard and code related to Material and Coating

• Good technical writing skills

• Able to work under supervise & instruction from PSL/HOD and work with other discipline as team

• SK0605010 Project production plan. Knowledge and understanding of fabrication sequences for different products (fixed facilities, subsea, etc.) and their own disciplines. Knowledge of resource planning and production activity duration. Ability to estimate the productive resource for a defined task. Ability to report performance indicators, identify criticalities, and propose corrective actions

• SK1004003 Engineering design activities. Knowledge of Discipline engineering design criteria, methods and workflows from conceptual phase up to site engineering phase. Capability to define the technical documents set based on Project quantities and scope of work. Capability to perform and coordinate Project engineering documents production activities and to check and review design documents, prepared either internally or by Vendors.

• SK1004007. Engineering standard codes and regulations. Knowledge of main international Discipline standards,codes and regulations. Capability to analyse dedicated Project requirements in terms of local standards and codes and to identify proper implementation actions. When required by the role, ability to mange the resolution of Engineering Non Conformity (NCR) at site supporting Construction and / or Fabrication activities effectively interfacing project Team, Client and Vendor.

• SK1004013. Quantity estimation for engineering disciplines. Capability to define the Project general rules and guidelines for Discipline quantities estimation either on Bid Projects or on Projects in execution, according to Corporate design standards, procedures, methods and tools. Capability to control and ensure the correct application of the general rules and guidelines by all team members and all subcontractors involved in quantity definition activities.

• SK1005006. Engineering project documents management. Capability to analyse engineering documents (e.g. Instruction to Tender, Saipem and subcontractor documents, etc.) identifying improvement areas in terms of cost/time optimization

• SK1005007. Engineering reporting techniques. Capability to monitor and control the engineering progress and schedule Contribute to Project reporting for the relevant engineering part.

• SK1005008. Engineering Subcontractor management and control. Capability to handle subcontracted engineering work packages defining the scope of work, the milestones and documentation deliverables. Capability to control the quality, the costs and the timing of the subcontracted activities ensuring the compliance with project scheduling and goals and with contract requirements

• SK1006003. Engineering technical software tools. User level knowledge of Corporate and OperatingCenter Discipline technical design software tools. User level knowledge of Corporate and Operating Center IT tools supporting business processes such as electronic document system management, procurement and office automation applications

• SK1007001 . Engineering equipment testing. Capability to define technical requirements for Discipline equipment and materials workshop testing according to Corporate standards, procedures, methods and tools

• SK1007002. Engineering Material Testing. Capability to define technical requirements for Discipline equipment and materials workshop testing according to Corporate standards, procedures, methods and tools

• SK1010002. Cathodic protection. Knowledge of the cathodic protection systems, materials and equipment in the oil&gas industry and pertinent to the Saipem's scope of work. Ability to select the proper cathodic protection system, its elements and materials and equipment according to the received input data. Knowledge of the anode materials and anodes fabrication process. Ability to conduct inspections and tests related to the cathodic protection and knowledge of the limits of the cathodic protection systems and equipment. Ability to prepare technical documents pertinent to the cathodic protection. Ability to work on sites: supervision of the works related to the cathodic protection, supervision of the fabrication of anodes, monitoring of the cathodic protection system, performance of the potential survey and resistivity survey onshore and offshore.

• SK1010003. Coating engineering. Knowledge of coating, painting and field joint coating systems for various elements in the O&G industry pertinent to the SAIPEM scope of work. Knowledge of the coating materials, coating application processes, technology, equipment and facilities applicable to the SAIPEM projects. Ability to select of the proper coating system,technology, process and equipment according to the received input data. Knowledge of inspections, tests and the limits of the coating systems and its application equipment. Ability to prepare various technical documents pertinent to the coating works (schedules, budget, technical and economical offer, specifications, procedures, inspection and test plans, etc.).

• SK1010004. Corrosion and protection. Knowledge of the principles of corrosion and corrosion control methodologies. Knowledge of the potential corrosion damage mechanisms affecting the materials used in the upstream and downstream Oil and Gas sectors when exposed to both the process(i.e. internal) and service (i.e. external) environments,including transient operations, e.g. installation, precommissioning,start-up and shut-down.Knowledge of the main Industry models and software for corrosion assessment in both sour and sweet services, their applicability and limitations and abilityto perform corrosion rate calculations and corrosion assessment evaluations. Knowledge of the main metallic (and non-metallic) materials, their chemical, physical and mechanical properties, their corrosion resistance properties in the various process and service environments and interaction among each other. Knowledge of the main corrosion control methodologies, such as materials selection, process control, metallurgical controls, chemical treatment, coatings/paintings/linings, cathodic protection (both sacrificial anodes and ICCP) and cleaning/preservation strategies, their applicability and limitations. Knowledge of the main applicable Industry materials selection and corrosion control international standards and codes (such as NACE, API, ISO, NORSOK, DNVGL, etc.) and ability to analyse Clients standards.

• SK1010006. Field Joint Coating engineering. Knowledge of the field joint coating materials, systems (e.g. HSS, FBE, IMPP, IMPU, etc.), application processes, technology and field joint coating equipment required by SAIPEM projects. Ability to select the proper field joint coating system and field joint coating equipment according to thereceived input data. Knowledge of the inspections and tests relevant to field joint coating and the limits of field joint coating systems and its equipment. Ability to prepare the various technical documents relevant to field joint coating (schedules, budget, technical and economical offer, specifications, procedures, inspection and test plans, etc.).

BRIEF JOB DESCRIPTIONS

• The Material and Corrosion ENGINEERING will be done at Alamanda Office, Jakarta.

• Follow the painting and coating activities in all its phases

• Follow the field joint coating activities during the bidding and engineering phases but not during the operative phase of the project

The Engineer executes the activities within own area of responsibility, ensuring the compliance with the QA/QC and HSE requirements.

Tasks include:

A. Research and Development

▪ Research and develop coating, painting and field joint coating materials and systems

▪ Research and develop FJC equipment

▪ Witness the field joint coating related trials

▪ Prepare the technical specification related to development of the field joint coating equipment and consumables

▪ Perform review and technical evaluation of offers from the field joint coating equipment manufacturer

▪ Perform/supervise the Factory Acceptance Test (FAT)

▪ Prepare the budget related to the field joint coating research and development operations

▪ Optimize the existing field joint coating equipment

▪ Provide technical assistance to the R&D department for the field joint coating equipment and materials

B. Feasibility Study

▪ Perform the feasibility studies for suitability of the coating, painting and field joint coating systems and equipment

C. Bidding Phase of the Project

▪ Review the received documents and elaborate the input data related to the coating, painting and field joint coating works

▪ Select the suitable coating, painting and field joint coating materials and systems

▪ Prepare the technical qualifications related to the coating, painting and field joint coating

▪ Prepare the specifications and technical requisitions related to the coating, painting and field joint coating materials and services

▪ Estimate the field joint coating cycle time (assisted by the Field Joint Coating Technology Engineer)

▪ Estimate the required man-hours related to the coating, painting and field joint coating engineering works in case of the project award

▪ Perform the technical evaluation of the offers received from Vendors related to the supply of the coating, painting and field joint coating materials and services (if any)

▪ Interface with the Asset Department for determination of the lay out of the FJC stations onboard the pipe laying vessel and for of availability of the field joint coating equipment

▪ Evaluate the equipment necessary to perform the job and feasibility study of the field joint coating operation on board pipe laying vessel including equipment that shall be developed fit for purpose

▪ Prepare the FJC method statement when the FJC operations shall be carried out directly by Saipem

▪ Prepare the technical offer for the field joint coating operations done by Saipem

▪ Prepare the budget related to the field joint coating operations done by Saipem

Also kindly put the disclaimer below in every job ad posted in your portal:

“Saipem and its subsidiaries recruit their #humanresources through specific procedures, selecting and #hiringcandidates, adopting criteria of merit, ability and professionalism in all #recruitment decisions and will never request payment of any kind. If you want to search #jobopportunities in Saipem. Please refer to the “careers” area of the Saipem website of the official Saipem LinkedIn page and be careful about any other kind of unofficial requests.”

Recruitment email: recruitment@saipem.com