Eni Indonesia; 10 Positions; 1 of 2 ads
Posting date: April 16, 2026 - Expiry Date: April 30, 2026
Eni is a global energy company headquartered in Italy, with a presence in Indonesia dating back to 1968. Today, Eni is among the country’s leading natural gas suppliers, with operations spanning exploration, development, and production, particularly in the deepwater areas of the Kutei Basin in the Makassar Strait. The company’s strategy is centered on the development of an integrated offshore gas hub, leveraging existing infrastructure to accelerate time-to-market and optimize investments.
We are looking for qualified personnel with high motivation, initiative, and integrity to fill the following position:
Job Title: Electrical Technician
Purpose:
The Electrical Technician is responsible to support the Electrical & Instrument operations in giving the Electrical advice and support to maximize the operation’s efficiency of Company's facilities and any other Projects.
Supervise electrical technicians in installing, troubleshooting, repairing and performing preventive maintenance of process instrumentation and safety systems on FPU/FPSO to ensure safe, efficient and dependable operation of equipment in order to achieve established production goals. Responsible for electrical switchgear, power generation and distribution systems, fixing the conduit, wiring and lighting, maintains process electric equipment (Electric motors, MCCs, Soft Starter, , DC power distributions, AC & DC control panels, UPS, Battery chargers), and electric utilities (HVAC, Electric appliance, PA Systems and emergency alarm systems etc) so that equipment will operate at all times in the manner for which it was designed and safety devices will sense out of limits conditions and cause appropriate alarms, partial shut-ins, and complete shut-ins
Electrical Technician activities will be conducted in safe manner with maximizing field production efficiency while minimizing the total maintenance cost (production downtime, spare parts, manpower, etc.) and meet daily production targets whilst complying with company guidelines and legal requirements.
General Accountabilities and Responsibilities:
- Provide electrical engineering and maintenance support to Operations and Maintenance teams.
- Proactively identify and develop ideas for improvements to the Electrical system that can add value to the asset.
- Provide operations electrical input and support to future field development.
- Engineer and design electrical modifications to gas plant and offshore facilities.
- Perform installation, reparation and troubleshooting of electrical and instrumentation equipment.
- Participate in Root Cause Analysis for significant equipment failures.
- Develop operating procedures and guidelines.
- Ensure sufficient spare part onboard FPU/FPSO as well as at shore base warehouse.
- Create, review, approve maintenance notifications and performing the verification of each outstanding maintenance notifications, review & plan maintenance orders, and inputting accurate technical data by utilizing an integrated Computerized Maintenance Management System (SAP) provided by the company based on the assigned roles and authorizations.
- Demonstrate appropriate safety behaviours and commitment to environmental policies.
- Using experience and knowledge to lead investigate and rectify equipment operational problems.
- Ensure appropriate risk assessments are carried out for all electrical and instrumentation activities, with particular attention to recognize the impact of change.
- Apply the lessons learned from design reviews, receiving inspections, and risk management findings and support team performance by sharing knowledge and best practices.
- Ensure the confidentiality of the company's documentation.
Health, Safety, Environment and Quality (HSEQ):
• Comply with rules and standards described in Company Policies, HSE Integrated Management System and Procedures
• Report all incidents
• Motivate staff and colleagues to comply with HSE rules and standards
• Participate in HSE related initiatives
Qualifications & Experience:
- Education: Diploma (D3) or equivalent as minimum in Instrumentation, Electronics or physics
- Professional Qualifications:
• Minimum 5 years of Oil & Gas Industry experience
• Minimum 5 years experience in the use of application of electrical and instrumentation simulation software
- Training & Courses:
• Employee Induction including HSE Awareness
• T-BOSIET (15 time) or T-FOET (refreshment)
• Coxswain Lifeboat
• Basic Fast Rescue Craft Coxswain Course
• OIM Controlling Emergencies Assessment
• Advance Fire Fighting
• Radioactive Source Security Officer (PKSR)
• Radiation Protection Officer (PPR)
• Occupational Health Safety Administration Series (OHSAS)
• Environmental Management System International Standardization Organization EMS IS0- 14001)
• BNSP-certified candidates are highly preferred
- Language: Fluent in English and Bahasa Indonesia
Required Competencies
Technical Competencies:
- Proficient in operation of Gas Turbines and generators including support packages and ancillary equipment.
- Ability to use and develop PLC, DCS and SCADA systems/
- Knowledge of gas plant and offshore operations.
- Extensive experience and exposure to Root Cause Analysis and troubleshooting of operational equipment with state-of-the-art diagnostic techniques.
- Experience in the design, installation, commissioning and operations of electrical, instrumentation and metering.
- Knowledge of subsea system, ORF and offshore operations desired.
- Pre-commissioning, commissioning and start-up experience.
- Production Operations: Maintenance Management, Predictive Maintenance,
- Operation/Maintenance Advising.
- Maintenance Engineering: CMMS Activities, Maintenance Engineering, Maintenance System Auditing, Maintenance Advising in Project Phase, Reliability/Availability
- Analysis techniques knowledge, Maintenance systems and policies knowledge
- Organization Processes : Internal Standard, Feedback development and diffusion,
- Technical Audit and Design review, Documentation Management.
- Support and Technologies: Standard ISO, TQM and Quality System, Technical requirement and Standard.
- Compliance: Local/National and International Standard and Codes, Health, Safety, Environment, Quality.
- Capable in terms of the maintenance management of Oil & Gas Platforms offshore receiving Processing Facility.
Non-Technical Competencies:
- Integrity & values
- Driving for results
- Value Creation Focus
- Teamwork & cooperation
- Initiative
- Analytical thinking
- Information seeking
- Concern for order
- Self-confidence
- Team player
Working Conditions:
Offshore/FPSO, rotational base.
Job Title: Electrical Technician
Purpose:
The Electrical Technician is responsible to support the Electrical & Instrument operations in giving the Electrical advice and support to maximize the operation’s efficiency of Company's facilities and any other Projects.
Supervise electrical technicians in installing, troubleshooting, repairing and performing preventive maintenance of process instrumentation and safety systems on FPU to ensure safe, efficient and dependable operation of equipment in order to achieve established production goals. Responsible for electrical switchgear, power generation and distribution systems, fixing the conduit, wiring and lighting, maintains process electric equipment (Electric motors, MCCs, Soft Starter, , DC power distributions, AC & DC control panels, UPS, Battery chargers), and electric utilities (HVAC, Electric appliance, PA Systems and emergency alarm systems etc) so that equipment will operate at all times in the manner for which it was designed and safety devices will sense out of limits conditions and cause appropriate alarms, partial shut-ins, and complete shut-ins
Electrical Technician activities will be conducted in safe manner with maximizing field production efficiency while minimizing the total maintenance cost (production downtime, spare parts, manpower, etc.) and meet daily production targets whilst complying with company guidelines and legal requirements.
General Accountabilities and Responsibilities:
- Provide electrical engineering and maintenance support to Operations and Maintenance teams.
- Proactively identify and develop ideas for improvements to the Electrical system that can add value to the asset.
- Provide operations electrical input and support to future field development.
- Engineer and design electrical modifications to gas plant and offshore facilities.
- Perform installation, reparation and troubleshooting of electrical and instrumentation equipment.
- Participate in Root Cause Analysis for significant equipment failures.
- Develop operating procedures and guidelines.
- Ensure sufficient spare part onboard FPU as well as at shore base warehouse.
- Create, review, approve maintenance notifications and performing the verification of each outstanding maintenance notifications, review & plan maintenance orders, and inputting accurate technical data by utilizing an integrated Computerized Maintenance Management System (SAP) provided by the company based on the assigned roles and authorizations.
- Demonstrate appropriate safety behaviours and commitment to environmental policies.
- Using experience and knowledge to lead investigate and rectify equipment operational problems.
- Ensure appropriate risk assessments are carried out for all electrical and instrumentation activities, with particular attention to recognize the impact of change.
- Apply the lessons learned from design reviews, receiving inspections, and risk management findings and support team performance by sharing knowledge and best practices.
- Ensure the confidentiality of the company's documentation.
Health, Safety, Environment and Quality (HSEQ):
• Comply with rules and standards described in Company Policies, HSE Integrated Management System and Procedures
• Report all incidents
• Motivate staff and colleagues to comply with HSE rules and standards
• Participate in HSE related initiatives
Qualifications & Experience:
- Education: Diploma (D3) or equivalent as minimum in Instrumentation, Electronics or physics
- Professional Qualifications:
• Minimum 5 years of Oil & Gas Industry experience
• Minimum 5 years experience in the use of application of electrical and instrumentation simulation software
- Training & Courses:
• Employee Induction including HSE Awareness
• T-BOSIET (15 time) or T-FOET (refreshment)
• Coxswain Lifeboat
• Basic Fast Rescue Craft Coxswain Course
• OIM Controlling Emergencies Assessment
• Advance Fire Fighting
• Radioactive Source Security Officer (PKSR)
• Radiation Protection Officer (PPR)
• Occupational Health Safety Administration Series (OHSAS)
• Environmental Management System International Standardization Organization EMS IS0- 14001)
• BNSP-certified candidates are highly preferred
- Language: Fluent in English and Bahasa Indonesia
Required Competencies
Technical Competencies:
- Proficient in operation of Gas Turbines and generators including support packages and ancillary equipment.
- Ability to use and develop PLC, DCS and SCADA systems/
- Knowledge of gas plant and offshore operations.
- Extensive experience and exposure to Root Cause Analysis and troubleshooting of operational equipment with state-of-the-art diagnostic techniques.
- Experience in the design, installation, commissioning and operations of electrical, instrumentation and metering.
- Knowledge of subsea system, ORF and offshore operations desired.
- Pre-commissioning, commissioning and start-up experience.
- Production Operations: Maintenance Management, Predictive Maintenance,
- Operation/Maintenance Advising.
- Maintenance Engineering: CMMS Activities, Maintenance Engineering, Maintenance System Auditing, Maintenance Advising in Project Phase, Reliability/Availability
- Analysis techniques knowledge, Maintenance systems and policies knowledge
- Organization Processes : Internal Standard, Feedback development and diffusion,
- Technical Audit and Design review, Documentation Management.
- Support and Technologies: Standard ISO, TQM and Quality System, Technical requirement and Standard.
- Compliance: Local/National and International Standard and Codes, Health, Safety, Environment, Quality.
- Capable in terms of the maintenance management of Oil & Gas Platforms offshore receiving Processing Facility.
Non-Technical Competencies:
- Integrity & values
- Driving for results
- Value Creation Focus
- Teamwork & cooperation
- Initiative
- Analytical thinking
- Information seeking
- Concern for order
- Self-confidence
- Team player
Working Conditions:
Offshore/FPU, rotational base.
Job Title: Field Operator
Purpose:
The field operator is responsible for monitoring plant operations of all Company’s offshore facilities. FPU field operator activities will be conducted in safety manner with maximizing uptime and field production efficiency while minimizing the total maintenance cost (production downtime, spare parts, manpower, etc.) through continuous and intensive engagement with Maintenance team. The objective is to meet daily production targets whilst complying with the Company guidelines and legal requirements to deliver highest value to stakeholders without compromising the Safe Operating Principals.
Managing with relevant administration and reporting. Most importantly able to manage emergency response (ER) role in the respective department and build effective communication with all Offshore Emergency Response Team members.
FPU field Operator will implement the Asset and Operating Integrity policy and procedure in production operations, also managing contractors who work in FPU in safe and clean environment, and compliance to regulations.
To support the development project activities relevant to the Company’s project – Production aspects both offshore with focus on construction, commissioning, and logistic issues of new oil/gas production facilities, ensuring that pre-commissioning, commissioning phase and start-up operations of facilities are conducted in safe, effective, and efficiently manner while meeting the Company target and the satisfaction of all parties.
To coordinate and support maintenance team and to ensure all front-line maintenance activity is performed quickly, safely, and sustainably.
General Accountabilities and Responsibilities:
- Ensuring production activities are carried out in compliance with all relevant procedures and legal requirements.
- Understanding process piping and instrument diagram.
- Managing and ensuring quality control of the CMMS technical data and Planned Front Line Maintenance Routines held within the CMMS planned maintenance and material inventory control modules.
- Reporting timely the loss of production (LPO) event to OIM.
- Using experience and knowledge to join investigation and rectifying any operational problems.
- Proactively analyzing field data and developing action plans to improve production performance that can add value to the asset through improved reliability and uptime.
- Liaising with control room FPU, EK parties, production engineers and other relevant functions to ensure daily production target is achieved.
- Completing all Production/Operation Assessment Program’s module and assist mentoring other members to minimize skills and knowledge gap between Operations team members.
- Producing comprehensive and accurate shift and crew change handover notes.
- Ensuring the safe start-up and shutdown of process facilities.
- Responding properly and promptly as Emergency Response Team member.
- Identifying any abnormal process conditions and report it to Lead Operator and taking immediate corrective action to ensure safe and continuous production.
- Ensuring that all day-to-day operation tasks are carried out according to Company’s established policies, legal requirement procedures and professional standards.
- Ensuring appropriate risk assessments are carried out for all Operation & Maintenance activities, with particular attention to recognize the impact of change.
- Ensuring that all planned and Front-Line Maintenance tasks associated with equipment and facilities structure are considered, and that all opportunities to minimize downtime of equipment are investigated to deliver maximum value.
- Maintaining accurate production record and analyzing data from process facilities.
- Integral member of the pre-commissioning, commissioning, and start-up teams.
- Applying the lessons learned from design reviews, receiving inspections, and risk management findings and support team performance by sharing knowledge and best practices.
- Maintaining stable production and monitoring all process and utilities.
Health, Safety, Environment and Quality (HSEQ):
• Comply with rules and standards described in Company Policies, HSE Integrated Management System and Procedures
• Report all incidents
• Motivate staff and colleagues to comply with HSE rules and standards
• Participate in HSE related initiatives
Qualifications & Experience:
- Education: Diploma (D3) in Chemical Engineering or any relevant subjects Professional
- Professional Qualifications: Minimum 5 years’ experience in Oil and Gas Industry
- Training & Courses:
• Employee Induction including HSE Awareness
• T-BOSIET (1st time) or T-FOET (refreshment)
• Advance Fire Fighting
• Scaffolding Inspector
• CSEA (Confined Space Entrant Attendant)
• Control Room Emergency
• AGT Certification
• BNSP-certified candidates are highly preferred
- Language: Fluent in English and Bahasa Indonesia
Required Competencies
Technical Competencies:
- Proficient in operation of Gas Turbine compressors and generators including support packages and ancillary equipment.
- Thorough knowledge of the operation of all FPU process facilities.
- Knowledge of subsea system, Custody Metering System, FPU utility and process Unit.
- Pre-commissioning, commissioning and start-up experienced.
- Demonstrate appropriate safety behaviours and commitment to environmental policies.
- Using experience and knowledge to investigate and rectify operational problems working mainly unsupervised.
- Active in mentoring program and support less experienced operators.
- Ability to conduct Operations Process upset – Troubleshooting in field facilities.
- Having good understanding for rotating equipment (turbine, motor, compressor, generator, pumps, etc), Instruments air system, Vent/Flare system Front Line Maintenance program.
- Familiar with Custody Metering System – Oil & Gas, Multiphase Flow Meter (MPFM) & Gas Chromatograph (GC).
- Thoroughly understood process equipment isolation/de-isolation for maintenance purposes.
- Familiar with PTW system.
- Having good understanding for Control Room operation, process utilities and ESD system.
Non-Technical Competencies:
- Integrity & values
- Driving for results
- Value Creation Focus
- Teamwork & Cooperation
- Initiative
- Concern for order
- Self-confidence
- Team player
Working Conditions:
Offshore/FPU, rotational base.
Job Title: Field Process Operator
Purpose:
The field process operator is responsible for monitoring plant operations of all Company’s Offshore facilities. Field process operator activities will be conducted in safety manner with maximizing uptime and field production efficiency while minimizing the total maintenance cost (production downtime, spare parts, manpower, etc.) through continuous and intensive engagement with Maintenance team. The objective is to meet daily production targets whilst complying with the Company guidelines and legal requirements to deliver highest value to stakeholders without compromising the Safe Operating Principals.
Managing with relevant administration and reporting. Most importantly able to manage emergency response (ER) role in the respective department and build effective communication with all Offshore Emergency Response Team members.
Field process operator will implement the Asset and Operating Integrity policy and procedure in production operations, also managing contractors who work in FPU in safe and clean environment, and compliance to regulations.
To support the development project activities relevant to the Company’s project – Production aspects relevant to offshore with focus on construction, commissioning, and logistic issues of new oil/gas production facilities, ensuring that pre-commissioning, commissioning phase and start-up operations of facilities are conducted in safe, effective, and efficiently manner while meeting the Company target and the satisfaction of all parties.
To coordinate and support maintenance team and to ensure all front-line maintenance activity is performed quickly, safely, and sustainably.
General Accountabilities and Responsibilities:
• Ensuring production activities are carried out in compliance with all relevant procedures and legal requirements.
• Understanding process piping and instrument diagram.
• Managing and ensuring quality control of the CMMS technical data and Planned Front Line Maintenance Routines held within the CMMS planned maintenance and material inventory control modules.
• Reporting timely the loss of production (LPO) event to OIM.
• Using experience and knowledge to join investigation and rectifying any operational problems.
• Proactively analyzing field data and developing action plans to improve production performance that can add value to the asset through improved reliability and uptime.
• Liaising with control room FPU, EK parties, production engineers and other relevant functions to ensure daily production target is achieved.
• Completing all Production/Operation Assessment Program’s module and assist mentoring other members to minimize skills and knowledge gap between Operations team members.
• Producing comprehensive and accurate shift and crew change handover notes.
• Ensuring the safe start-up and shutdown of process facilities.
• Responding properly and promptly as Emergency Response Team member.
• Identifying any abnormal process conditions and report it to Lead Operator/CCRO and taking immediate corrective action to ensure safe and continuous production.
• Ensuring that all day-to-day operation tasks are carried out according to Company’s established policies, legal requirement procedures and professional standards.
• Ensuring appropriate risk assessments are carried out for all Operation & Maintenance activities, with particular attention to recognize the impact of change.
• Ensuring that all planned and Front-Line Maintenance tasks associated with equipment and facilities structure are considered, and that all opportunities to minimize downtime of equipment are investigated to deliver maximum value.
• Maintaining accurate production record and analyzing data from process facilities.
• Integral member of the pre-commissioning, commissioning, and start-up teams.
• Applying the lessons learned from design reviews, receiving inspections, and risk management findings and support team performance by sharing knowledge and best practices.
• Maintaining stable production and monitoring all process and utilities.
• Apply the lessons learned from design reviews, receiving inspections, and risk management findings and support team performance by sharing knowledge and best practices.
• Attending emergency work after normal working hours on a callout basis if needed.
• Acting as coordinator to guide daily activities for Assistant Operator, Grass cutter and Housekeeper team if needed.
Qualifications & Experience:
- Education: Diploma (D3) in Chemical Engineering or any relevant subjects Professional Qualification: 5 years of Oil & Gas Industry experience
- Training and Certification:
• Employee Induction including HSE Awareness
• T-BOSIET (1st time) or T-FOET (refreshment)
• Advance Fire Fighting
• Scaffolding Inspector
• CSEA (Confined Space Entrant Attendant)
• Control Room Emergency
• AGT Certification
• BNSP-certified candidates are highly preferred
- Language: Fluent in English and Bahasa Indonesia
Health, Safety, Environment and Quality (HSEQ):
• Comply with rules and standards described in Company Policies, HSE Integrated Management System and Procedures
• Report all incidents.
• Motivate staff and colleagues to comply with HSE rules and standards.
• Participate in HSE related initiatives.
Required Competencies
Technical Competencies:
- Proficient in operation of Rotating equipment including support packages and ancillary equipment.
- Thorough knowledge of the operation of all FPU process facilities.
- Knowledge of subsea system, Custody Metering System, FPU utility and process Unit.
- Pre-commissioning, commissioning and start-up experienced.
- Demonstrate appropriate safety behaviours and commitment to environmental policies.
- Using experience and knowledge to investigate and rectifying operational problems working mainly unsupervised.
- Active in mentoring program and support less experienced operators.
- Ability to conduct Operations Process upset – Troubleshooting in field facilities.
- Having good understanding for rotating equipment (turbine, motor, compressor, generator, pumps, etc), Instruments air system, Vent/Flare system Front Line Maintenance program.
- Familiar with Custody Metering System – Oil & Gas, Multiphase Flow Meter (MPFM) & Gas Chromatograph (GC).
- Thoroughly understood process equipment isolation/de-isolation for maintenance purposes.
- Familiar with PTW system.
- Having good understanding for Control Room operation, process utilities and ESD system.
Non-Technical Competencies:
- Integrity & values
- Driving for results
- Value Creation Focus
- Teamwork & Cooperation
- Initiative
- Concern for order
- Self-confidence
- Team player
Working Conditions:
Offshore based – Rotational (FPSO)
Job Title: Field Utility Operator
Purpose:
The field utility operator is responsible for monitoring plant operations of all Company’s Offshore facilities. Field utility operator activities will be conducted in safety manner with maximizing uptime and field production efficiency while minimizing the total maintenance cost (production downtime, spare parts, manpower, etc.) through continuous and intensive engagement with Maintenance team. The objective is to meet daily production targets whilst complying with the Company guidelines and legal requirements to deliver highest value to stakeholders without compromising the Safe Operating Principals.
Managing with relevant administration and reporting. Most importantly able to manage emergency response (ER) role in the respective department and build effective communication with all Offshore Emergency Response Team members.
Field utility operator will implement the Asset and Operating Integrity policy and procedure in production operations, also managing contractors who work in FPU in safe and clean environment, and compliance to regulations.
To support the development project activities relevant to the Company’s project – Production aspects relevant to offshore with focus on construction, commissioning, and logistic issues of new oil/gas production facilities, ensuring that pre-commissioning, commissioning phase and start-up operations of facilities are conducted in safe, effective, and efficiently manner while meeting the Company target and the satisfaction of all parties.
To coordinate and support maintenance team and to ensure all front-line maintenance activity is performed quickly, safely, and sustainably.
General Accountabilities and Responsibilities:
• Ensuring production activities are carried out in compliance with all relevant procedures and legal requirements.
• Understanding process piping and instrument diagram.
• Managing and ensuring quality control of the CMMS technical data and Planned Front Line Maintenance Routines held within the CMMS planned maintenance and material inventory control modules.
• Reporting timely the loss of production (LPO) event to OIM.
• Using experience and knowledge to join investigation and rectifying any operational problems.
• Proactively analyzing field data and developing action plans to improve production performance that can add value to the asset through improved reliability and uptime.
• Liaising with control room FPU, EK parties, production engineers and other relevant functions to ensure daily production target is achieved.
• Completing all Production/Operation Assessment Program’s module and assist mentoring other members to minimize skills and knowledge gap between Operations team members.
• Producing comprehensive and accurate shift and crew change handover notes.
• Ensuring the safe start-up and shutdown of process facilities.
• Responding properly and promptly as Emergency Response Team member.
• Identifying any abnormal process conditions and report it to Lead Operator/CCRO and taking immediate corrective action to ensure safe and continuous production.
• Ensuring that all day-to-day operation tasks are carried out according to Company’s established policies, legal requirement procedures and professional standards.
• Ensuring appropriate risk assessments are carried out for all Operation & Maintenance activities, with particular attention to recognize the impact of change.
• Ensuring that all planned and Front-Line Maintenance tasks associated with equipment and facilities structure are considered, and that all opportunities to minimize downtime of equipment are investigated to deliver maximum value.
• Maintaining accurate production record and analyzing data from process facilities.
• Integral member of the pre-commissioning, commissioning, and start-up teams.
• Applying the lessons learned from design reviews, receiving inspections, and risk management findings and support team performance by sharing knowledge and best practices.
• Maintaining stable production and monitoring all process and utilities.
• Apply the lessons learned from design reviews, receiving inspections, and risk management findings and support team performance by sharing knowledge and best practices.
• Attending emergency work after normal working hours on a callout basis if needed.
• Acting as coordinator to guide daily activities for Assistant Operator, Grass cutter and Housekeeper team if needed.
Qualifications & Experience:
- Education: Diploma (D3) in Chemical Engineering or any relevant subjects
- Professional Qualification: 5 years of Oil & Gas Industry experience
- Training and Certification:
• Employee Induction including HSE Awareness
• T-BOSIET (1st time) or T-FOET (refreshment)
• Advance Fire Fighting
• Scaffolding Inspector
• CSEA (Confined Space Entrant Attendant)
• Control Room Emergency
• AGT Certification
• BNSP-certified candidates are highly preferred
- Language: Fluent in English and Bahasa Indonesia
Health, Safety, Environment and Quality (HSEQ):
• Comply with rules and standards described in Company Policies, HSE Integrated Management System and Procedures
• Report all incidents.
• Motivate staff and colleagues to comply with HSE rules and standards.
• Participate in HSE related initiatives.
Required Competencies
Technical Competencies:
- Proficient in operation of Rotating equipment including support packages and ancillary equipment.
- Thorough knowledge of the operation of all FPU process facilities.
- Knowledge of subsea system, Custody Metering System, FPU utility and process Unit.
- Pre-commissioning, commissioning and start-up experienced.
- Demonstrate appropriate safety behaviours and commitment to environmental policies.
- Using experience and knowledge to investigate and rectifying operational problems working mainly unsupervised.
- Active in mentoring program and support less experienced operators.
- Ability to conduct Operations Process upset – Troubleshooting in field facilities.
- Having good understanding for rotating equipment (turbine, motor, compressor, generator, pumps, etc), Instruments air system, Vent/Flare system Front Line Maintenance program.
- Familiar with Custody Metering System – Oil & Gas, Multiphase Flow Meter (MPFM) & Gas Chromatograph (GC).
- Thoroughly understood process equipment isolation/de-isolation for maintenance purposes.
- Familiar with PTW system.
- Having good understanding for Control Room operation, process utilities and ESD system.
Non-Technical Competencies:
- Integrity & values
- Driving for results
- Value Creation Focus
- Teamwork & Cooperation
- Initiative
- Concern for order
- Self-confidence
- Team player
Working Conditions:
Offshore based – Rotational (FPSO)
Job Title: Instrument Technician
Purpose:
- To ensure that operating parameters for all instrument equipment at the Company’s facilities are operating within design limits and that any abnormalities are communicated and assessed immediately.
- To guarantee the prompt, safe, and environment respecting execution of Maintenance activities will be conducted in a safe manner with maximizing uptime and field production efficiency while minimizing the total maintenance cost (production downtime, spare parts, manpower, etc.).
- To participate in maintaining and repairing/troubleshooting of all Instrumentation and process/equipment control of production facilities and the common Instrumentation properties, including the Instrumentation inside L/Q, in the FPU/FPSO and ESD/F&G system to achieve safety, efficiency, environment, quality and the established production goals.
- To support capital project activities relevant to the Company’s facilities from the design phase up to commissioning and startup operations to ensure the project is safe, effective, and efficient.
General Accountabilities and Responsibilities:
- Ensure all relevant Instrument equipment is fully operational, in service, maintained safely, effectively and in accordance with procedures and equipment design codes and standards.
- Ensure maintenance activities are carried out in compliance with all relevant procedures and legal requirements.
- Ensure that all Safety Critical element PM’s are completed as per plan and schedule.
- Ensure all work is coordinated and aligned with production priorities and within the issued job plan and schedules, including reporting by the scheduler from the CMMS.
- Liaise with Scheduler regarding the forward planning of spare parts deliverability and in determining min/max stock levels of spare parts and maintenance consumables on the facility.
- Maintain complete and accurate equipment history records within the Computerized Maintenance Management System.
- Apply the lessons learned from design reviews, receiving inspections, and risk management findings and support team performance by sharing knowledge and best practices.
- Conduct and coordinate instrument maintenance contractors (if any) inspections and calibrations, function tests and evaluate Instrument and Control equipment operation and condition to determine remedial action.
- Prepare maintenance activities for flawless execution, ensuring permits, PPE, tools, materials, equipment, work site preparation, and toolbox talks are in place and always completed.
- Manage relevant reporting and administration work based on the needs of the respective organization (including data recording, correspondence, etc. – based on the function of this position).
- Produce comprehensive and accurate shift and crew change handover notes.
- Ensure that any changes to instrument-controlled documentation, as a result of MOC (Management of Change) work, are captured and correctly recorded.
- If required, attend Emergency work after normal working hours on a callout basis.
- Participate in Root Cause Analysis for equipment failures.
Health, Safety, Environment and Quality (HSEQ):
• Comply with rules and standards described in Company Policies, HSE Integrated Management System and Procedures
• Report all incidents
• Motivate staff and colleagues to comply with HSE rules and standards
• Participate in HSE related initiatives
Qualifications & Experience:
- Education: Diploma (D3) or equivalent as minimum in Instrumentation, Electronics or physics
- Professional Qualifications: Minimum 5 years of working experience in Oil & Gas industry
- Training & Courses:
• Employee Induction including HSE Awareness
• T-BOSIET (1st time) or T-FOET (refreshment)
• Advance Fire Fighting
• BNSP-certified candidates are highly preferred
• CSEA (Confined Spaces Entrant Attendant)
- Language: Fluent in English and Bahasa Indonesia
Required Competencies
Technical Competencies:
- Familiar with a variety of instrumentation equipment and manufacturers of control valves, solenoid valves, instruments analyser, transmitters, etc.
- Good knowledge of production facilities in an oil/gas including installation, repair testing and maintenance of wide range of instrumentation systems, Fire & Gas and metering system.
- Must have the ability to read and understand drawings and specifications specific to instrumentation discipline, e.g., P&ID, Loop Diagrams, Junction box and marshalling cabinet schematic diagrams, cable block diagrams, vendor control drawings, etc.
- Familiar with hazardous areas and hazardous area equipment certification.
- Familiar with pneumatic and electronic field instruments including transmitters, local gauges, meters, solenoid valves, etc. The ability to fault diagnose and repair, calibrate and adjust as required is essential.
- Familiar with smart type instrumentations including remote calibration and monitoring via HART Communicators.
- Familiar with programmable electronic systems including Distributed Control Systems (DCS) and Programmable Logic Controllers (PLC).
- Familiar with standard operating practice with respect to maintenance activities in an operational Oil & Gas production/processing environment, with specific regard to hazardous area practise and restrictions.
- Familiar and experience with Root Cause Analysis and in troubleshooting of instrument system.
- Familiar with Maintenance Management system CMMS-SAP.
Non-Technical Competencies:
- Integrity & values
- Driving for results
- Value Creation Focus
- Teamwork & cooperation
- Initiative
- Analytical thinking
- Information seeking
- Concern for order
- Self-confidence
- Team player
Working Conditions:
Offshore/FPSO, rotational base.
Job Title: Instrument Technician
Purpose:
- To ensure that operating parameters for all instrument equipment at the Company’s facilities are operating within design limits and that any abnormalities are communicated and assessed immediately.
- To guarantee the prompt, safe, and environment respecting execution of Maintenance activities will be conducted in a safe manner with maximizing uptime and field production efficiency while minimizing the total maintenance cost (production downtime, spare parts, manpower, etc.).
- To participate in maintaining and repairing/troubleshooting of all Instrumentation and process/equipment control of production facilities and the common Instrumentation properties, including the Instrumentation inside L/Q, in the FPU and ESD/F&G system to achieve safety, efficiency, environment, quality and the established production goals.
- To support capital project activities relevant to the Company’s facilities from the design phase up to commissioning and startup operations to ensure the project is safe, effective, and efficient.
General Accountabilities and Responsibilities:
- Ensure all relevant Instrument equipment is fully operational, in service, maintained safely, effectively and in accordance with procedures and equipment design codes and standards.
- Ensure maintenance activities are carried out in compliance with all relevant procedures and legal requirements.
- Ensure that all Safety Critical element PM’s are completed as per plan and schedule.
- Ensure all work is coordinated and aligned with production priorities and within the issued job plan and schedules, including reporting by the scheduler from the CMMS.
- Liaise with Scheduler regarding the forward planning of spare parts deliverability and in determining min/max stock levels of spare parts and maintenance consumables on the facility.
- Maintain complete and accurate equipment history records within the Computerized Maintenance Management System.
- Apply the lessons learned from design reviews, receiving inspections, and risk management findings and support team performance by sharing knowledge and best practices.
- Conduct and coordinate instrument maintenance contractors (if any) inspections and calibrations, function tests and evaluate Instrument and Control equipment operation and condition to determine remedial action.
- Prepare maintenance activities for flawless execution, ensuring permits, PPE, tools, materials, equipment, work site preparation, and toolbox talks are in place and always completed.
- Manage relevant reporting and administration work based on the needs of the respective organization (including data recording, correspondence, etc. – based on the function of this position).
- Produce comprehensive and accurate shift and crew change handover notes.
- Ensure that any changes to instrument-controlled documentation, as a result of MOC (Management of Change) work, are captured and correctly recorded.
- If required, attend Emergency work after normal working hours on a callout basis.
- Participate in Root Cause Analysis for equipment failures.
Health, Safety, Environment and Quality (HSEQ):
• Comply with rules and standards described in Company Policies, HSE Integrated Management System and Procedures
• Report all incidents
• Motivate staff and colleagues to comply with HSE rules and standards
• Participate in HSE related initiatives
Qualifications & Experience:
- Education: Diploma (D3) or equivalent as minimum in Instrumentation, Electronics or physics
- Professional Qualifications: Minimum 5 years of working experience in Oil & Gas industry
- Training & Courses:
• Employee Induction including HSE Awareness
• T-BOSIET (1st time) or T-FOET (refreshment)
• Advance Fire Fighting
• BNSP-certified candidates are highly preferred
• CSEA (Confined Spaces Entrant Attendant)
- Language: Fluent in English and Bahasa Indonesia
Required Competencies
Technical Competencies:
- Familiar with a variety of instrumentation equipment and manufacturers of control valves, solenoid valves, instruments analyser, transmitters, etc.
- Good knowledge of production facilities in an oil/gas including installation, repair testing and maintenance of wide range of instrumentation systems, Fire & Gas and metering system.
- Must have the ability to read and understand drawings and specifications specific to instrumentation discipline, e.g., P&ID, Loop Diagrams, Junction box and marshalling cabinet schematic diagrams, cable block diagrams, vendor control drawings, etc.
- Familiar with hazardous areas and hazardous area equipment certification.
- Familiar with pneumatic and electronic field instruments including transmitters, local gauges, meters, solenoid valves, etc. The ability to fault diagnose and repair, calibrate and adjust as required is essential.
- Familiar with smart type instrumentations including remote calibration and monitoring via HART Communicators.
- Familiar with programmable electronic systems including Distributed Control Systems (DCS) and Programmable Logic Controllers (PLC).
- Familiar with standard operating practice with respect to maintenance activities in an operational Oil & Gas production/processing environment, with specific regard to hazardous area practise and restrictions.
- Familiar and experience with Root Cause Analysis and in troubleshooting of instrument system.
- Familiar with Maintenance Management system CMMS-SAP.
Non-Technical Competencies:
- Integrity & values
- Driving for results
- Value Creation Focus
- Teamwork & cooperation
- Initiative
- Analytical thinking
- Information seeking
- Concern for order
- Self-confidence
- Team player
Working Conditions:
Offshore/FPU, rotational base.
Job Title: Loading Master
Purpose:
The Loading Master is a senior marine officer responsible for the safe and efficient management of all hydrocarbon cargo and ballast water systems onboard the FPSO. This includes ensuring vessel stability and trim, maintaining cargo quality specifications, and preparing for offloading operations. The role requires deep coordination with the Topside Operations team to balance production with storage capacity and acts as the lead for the cargo and ballast control operators. Strict adherence to Indonesian national regulations is mandatory.
General Accountabilities and Responsibilities:
A. Cargo & Ballast Management:
• Cargo Planning: Develop and execute detailed cargo and ballast management plans to maintain the FPSO's stability, hull stress, upright heel/list and draught within designed limits at all times. Develop plan and execute work sequence during cargo offload to offtake tanker.
• System Operation: Manage and oversee the operation of the cargo and ballast systems, including pumps, valves, inert system, crude oil washing system and stripping systems, via the ship's automated control system.
• Storage Management: Monitor tank levels, temperatures, and pressures for all cargo tanks, slop tanks, and all other tanks including ballast tanks. Coordinate with Production to manage incoming production flow against available storage capacity.
Stability & Stress Calculations: Perform daily and critical-operation stability, trim, and shear force/bending moment calculations using dedicated software. Issue formal reports.
B. Cargo Quality Assurance:
• Quality Control: Work closely with the Production Chemist or Topside Operators to monitor the quality of produced condensate/oil (e.g., BS&W, salinity, density, RVP).
• Specification Compliance: Ensure all cargo in storage meets the contractual specifications required for offtake and sale. This involves overseeing the sampling and testing process.
• Tank Cleaning: Plan and oversee tank cleaning operations to maintain cargo quality and prevent contamination.
• Cargo Records: Maintain accurate records of all cargo quantities (including ullage/innage gauging) and quality data for reconciliation and customs purposes.
C. Offloading Preparation & Support:
• Pre-Offloading Readiness: Prepare the cargo system for offloading: line up valves, prepare pumps, and ensure all equipment is functional. Prepare all administration documents include but are not limited to Pre Arrival Check, Cargo Meeting, Sequence Time during Cargo Operation.
• Support to Mooring Master: Work under the direction of the Mooring Master (a distinct, often more senior role) during the offloading process. The Loading Master's team manages the internal cargo transfer and pumping to the offtake tanker.
• Cargo Calculation: Accurately calculate and document the quantity of cargo transferred to the shuttle tanker (Bill of Lading figures, Manifest, Statement of Fact), acting as the FPSO's official representative for quantity.
D. Team Management & Safety:
• Supervision: Directly supervise the Cargo Control Room Operators, Ballast Operator and deck crew involved in cargo and ballast operations.
• Training: Ensure all team members are trained and competent in operating cargo/ballast systems and emergency procedures.
• Safety & Compliance: Enforce all safety procedures, Permit-to-Work (PTW) systems, and isolations for work on cargo and ballast systems. Lead by example in implementing the company's Safety Management System (SMS).
• Emergency Response: Fulfill a key role in the vessel's Emergency Response team, particularly for scenarios related to cargo spills, stability issues, or fire/explosion.
E. Coordination & Administration (Indonesia Focus):
• Interface with Topside Operations: Maintain constant communication with the Production team lead to align marine storage plans with production rates and shutdowns. This is a critical daily interface.
• Regulatory Compliance: Ensure all operations comply with Indonesian regulations from:
o DIRJEN HUBLA (Directorate General of Sea Transportation): Cargo Operations, Vessel stability, safety, and pollution prevention regulations.
o SKK Migas: Specific reporting and operational requirements for oil and gas upstream activities.
o Customs & Excise: Accurate reporting of cargo quantities for export and tax purposes.
• Documentation: Manage all marine-related documentation, including cargo logs, ballast water record books, stability booklets, Intact Stability Booklet and Indonesian regulatory reports.
Health, Safety, Environment and Quality (HSEQ):
• Comply with rules and standards described in Company Policies, HSE Integrated Management System and Procedures
• Report all incidents
• Motivate staff and colleagues to comply with HSE rules and standards
Participate in HSE related initiatives
Qualifications & Experience:
• Education: Minimum Level Class -2 Deck Officer with dangerous cargo endorsement.
• Professional Qualification:
- A minimum of 5 years of experience as a Chief Officer (C/O) on crude oil tankers, product tankers, or LNG carriers. Direct experience on an FPSO or FSO is highly desirable and often essential.
- Proven, hands-on experience in cargo and ballast operations, including extensive use of automated control systems.
- Demonstrated experience in performing stability and stress calculations for large vessels.
- Experience in a supervisory role, managing a team of operators.
- Experience working in Southeast Asia or Indonesia is a significant advantage.
Certification, training and courses:
Mandatory Certifications (STCW & Indonesian):
• Chief Mate (Class II) or Master Mariner (Class I) Certificate of Competency recognized by the Indonesian government. A Chief Mate ticket is often the minimum requirement.
• Valid STCW Certificates (Advanced Firefighting, Proficiency in Survival Craft, etc.).
• Tanker Endorsements: Mandatory STCW certificates for Oil Tanker and preferably Liquefied Gas Tanker operations (for condensate).
• Seafarer's Medical Certificate.
• Indonesian Specific Certifications: The company will facilitate, but eligibility is key. This may include:
• ADPT (Ahli Deklarasi Pengangkutan Tujuan) for hazardous cargo.
• Familiarization with Indonesian port state and flag state requirements.
Language: Proficient in English and Bahasa
Required Competencies:
Technical Competencies
• Technical Expertise: In-depth knowledge of tanker operations, hydrodynamics, and crude oil/condensate characteristics.
Non-Technical Competencies
• Leadership & Teamwork: Ability to lead a marine team and collaborate effectively with the production (topside) department, which often has a different reporting structure and priorities.
• Problem-Solving: Strong analytical skills to troubleshoot issues with cargo systems, balance stability during production, and manage capacity constraints.
• Communication: Excellent verbal and written communication skills in English. Knowledge of Bahasa Indonesia is a major advantage for managing local crew and understanding local regulations.
• Meticulous Attention to Detail: Absolute accuracy is required in cargo calculations, stability calculations, and following complex procedures.
Working Conditions:
Offshore/FPSO, possibility for business travel to other Eni premises or field areas.
Job Title: Maintenance Specialist
Purpose:
The Maintenance Specialist is responsible for ensuring that operating parameters for all Mechanical equipment at the Eni’s Jangkrik facilities are operating within design limits and that any abnormalities are communicated and assessed immediately.
Maintenance Specialist is guaranteeing the prompt, safe and environment respecting execution of Maintenance activities will conduct in safe manner with maximizing uptime and field production efficiency while minimizing the total maintenance cost (production downtime, spare parts, man power, etc.) and meet daily production targets whilst complying with company guidelines and legal requirements to deliver highest value to stakeholders without compromise to Safe Operating Principals.
Support capital project activities relevant to the Jangkrik facilities from design phase up to commissioning and startup operations in order to ensure the project is safe, effective and efficient.
General Accountabilities and Responsibilities:
- Ensure all relevant Mechanical equipment is fully operational, in service, maintained safely, effectively and in accordance with procedures and equipment design codes and standards.
- Ensure maintenance activities are carried out in compliance with all relevant procedures and legal requirements.
- Ensure that all Safety Critical element PM’s are completed with plan.
- Ensure all work is coordinated and aligned with production priorities and within the issued job plan and schedules, including reporting by the scheduler from the CMMS.
- Liaise with Scheduler with regard to the forward planning of spare parts deliverability and in determining min/max stock levels of spare parts and maintenance consumables on the facility.
- Maintain complete and accurate equipment history records within the Computerized Maintenance Management System.
- Apply the lessons learned from design reviews, receiving inspections, and risk management findings and support team performance by sharing knowledge and best practices.
- Conduct and coordinate Mechanical maintenance contractors (if any) inspections and calibrations, function tests and evaluate Mechanical equipment operation and condition to determine remedial action.
- Prepare maintenance activities for flawless execution, ensuring permits, PPE, tools, materials, equipment, work site preparation, and toolbox talks are in place and completed at all times.
- Manage relevant reporting and administration work based on the needs of the respective organization (including data recording, correspondence, etc. – based on the function of this position).
- Produce comprehensive and accurate shift and crew change handover notes.
- Ensure that any changes to Mechanical controlled documentation, as a result of MOC (Management of Change) work, are captured and correctly recorded.
- If required, attend Emergency work after normal working hours on a callout basis.
- Participate in Root Cause Analysis for equipment failures.
Health, Safety, Environment and Quality (HSEQ):
• Comply with rules and standards described in Company Policies, HSE Integrated Management System and Procedures
• Report all incidents
• Motivate staff and colleagues to comply with HSE rules and standards
• Participate in HSE related initiatives
Qualifications & Experience:
- Education: Bachelor Degree or equivalent as minimum in Mechanical
- Professional Qualifications: Minimum 5 years of Oil & Gas Industry experience, and at least 5 years in maintenance specialist position
- Training & Courses:
• Employee Induction including HSE Awareness
• T-BOSIET (1st time) or T-FOET (refreshment)
• Advance Fire Fighting
• CSEA (Confined Spaces Entrant Attendant)
• BNSP-certified candidates are highly preferred
- Language: Fluent in English and Bahasa Indonesia
Required Competencies
Technical Competencies:
- Extensive experience and exposure with a variety of Mechanical equipment and manufacturers
- Good knowledge of production facilities in an oil/gas including installation, repair testing and maintenance of wide range of Mechanical systems.
- Must have the ability to read and understand drawings and specifications specific to Mechanical discipline, e.g. P&ID, vendor control drawings, etc.
- Extensive experience and exposure with hazardous areas and hazardous area equipment certification.
- Extensive experience and exposure with standard operating practice with respect to maintenance activities in an operational Oil & Gas production/processing environment, with specific regard to hazardous area practise and restrictions.
- Extensive experience and exposure with Maintenance Management system CMMS-SAP
- Extensive experience and exposure with hazard associate with Manual handling and operation maintenance requirements of fixed and mobile lifting equipment, including offshore cranes and inspection requirements under design code API 2C.
- Extensive experience and exposure with maintenance requirements and hazards of high pressure piping systems, valve types, and flange management.
- Extensive experience and exposure with levelling and alignment rotating equipment.
- Extensive experience and exposure with operation and maintenance of industrial single & double fuel Gas Turbines and the installation and removal of compressor dry gas seals.
- Extensive experience and exposure with operation and maintenance of HVAC systems.
- Extensive experience and exposure with operation and maintenance of centrifugal compressors, centrifugal pumps, air compressors and dryers, fin fan air coolers, pedestal cranes, diesel engine drivers, and utility packages.
- Extensive experience and exposure with use of hydraulic and pneumatic bolt torque and tensioning equipment.
- Extensive experience and exposure with standard operating practice with respect to maintenance activities in an operational oil & gas production/processing environment, with specific regard to hazardous area practices and restrictions.
- Extensive experience and exposure to root cause analysis and troubleshooting of operational equipment with state of the art diagnostic techniques.
Non-Technical Competencies:
- Integrity & values
- Driving for results
- Value Creation Focus
- Teamwork & cooperation
- Initiative
- Analytical thinking
- Information seeking
- Concern for order
- Self-confidence
- Team player
Working Conditions:
Offshore/FPU, rotational base.
Job Title: Marine Supervisor
Purpose:
The Marine Supervisor is the senior marine representative on board the FPSO, responsible for the safe, efficient, and compliant execution of all marine operations. This encompasses the management of the marine deck crew, all lifting and rigging operations, and the maintenance of the vessel's hull, utility systems, and safety equipment. The role requires strong leadership to ensure seamless collaboration with the Topside Operations team and direct support to the Mooring and Loading Masters during offloading operations, all while ensuring strict adherence to Indonesian regulations.
General Accountabilities and Responsibilities:
A. Personnel & Operational Management:
• Team Leadership: Directly supervise, mentor, and manage the daily activities of the entire marine crew, including Deck Foremen, Crane Operators, Riggers, Painters, Marine Operators, Radio Operator, Lifesaving Appliances and Fire Fighting Appliance Technicians.
• Work Planning: Plan, schedule, and assign daily and weekly work schedules for the marine team in coordination with the overall FPSO plan and the Permit-to-Work (PTW) system.
• Crane & Lifting Operations: Act as the primary authority and appointed person for all lifting operations. Ensure all lifts are planned, risk-assessed, and executed in accordance with company procedures and best practices. Personally supervise critical or complex lifts.
• Deck Operations: Oversee all deck operations, including cargo handling, supply vessel operations, helicopter operations (landing area safety), painting and scaffolding.
B. Hull Systems & Maintenance:
• Hull Systems Supervision: Direct the Marine Operators in the operation, maintenance, and troubleshooting of all systems located in the hull, including:
o Ballast and bilge systems
o Power generation and distribution systems (auxiliary power)
o HVAC systems for accommodation and technical spaces
o Freshwater production and distribution systems
o Sewage treatment plant
• Preventive Maintenance: Ensure the timely and quality execution of the preventive maintenance program for all marine systems and equipment under his responsibility.
• Technical Liaison: Act as the key liaison between the marine crew and the technical department (electrical, mechanical, instrumentation) for work on hull-based systems.
C. Safety & Emergency Systems:
• LSA/FFA Integrity: Ensure all lifesaving appliances (lifeboats, life rafts, immersion suits) and firefighting equipment (fire pumps, hydrants, monitors, fixed systems) are continuously maintained, inspected, and recorded as per statutory and company requirements.
• Drills & Training: Organize and lead regular marine-specific drills (e.g., lifeboat launching, man overboard, fire drills). Provide training and competency assurance for the marine crew.
• Audits & Inspections: Conduct regular audits and inspections of marine areas, equipment, and procedures. Act as a focal point for internal and external (including Indonesian government) marine safety audits.
D. Communication & Offloading Support:
• Radio Room Supervision: Supervise the Radio Operator to ensure flawless 24/7 communication, particularly with helicopter traffic for passenger transfers and with offtake tankers and support vessels during offloading operations.
• Offloading Support: Work under the direction of the Mooring Master and Loading Master. Manage the deck crew to safely execute the connecting and disconnecting of offloading hoses, handling of hawser ropes, and operation of deck machinery during tanker mooring and offloading operations.
E. Compliance & Administration (Indonesia Focus):
• Regulatory Compliance: Ensure all marine operations strictly comply with Indonesian regulations from DIRJEN HUBLA (Sea Transportation) and SKK Migas (Oil & Gas).
• Documentation: Maintain accurate records and logs for all marine activities, including crane operations, lifting plans, ballast logs, LSA/FFA inspections, radio traffic, and crew training.
• Reporting: Provide daily reports to the OIM and regular reports to the Marine Superintendent on the status of marine operations, crew performance, and any issues.
Health, Safety, Environment and Quality (HSEQ):
• Comply with rules and standards described in Company Policies, HSE Integrated Management System and Procedures
• Report all incidents
• Motivate staff and colleagues to comply with HSE rules and standards
• Participate in HSE related initiatives
Qualifications & Experience:
- Education: Minimum Class – 2 Deck or Engine Officer with dangerous cargo endorsement.
- Professional Qualifications:
• A minimum of 8 years of experience in the maritime industry, with a significant portion on offshore oil and gas vessels (FPSO, FSO, Drill Ships, AHTS).
• At least 3 years in a senior supervisory role such as Boatswain (Bosun), Deck Foreman, or Chief Mate on an vessel, with proven experience managing a team.
• Extensive hands-on experience with deck machinery, crane operations, lifting, rigging, and maintenance of lifesaving and firefighting equipment.
• FPSO experience is a significant advantage, particularly with tandem offloading operations and hull utility systems.
• Experience working in Southeast Asia or Indonesia is highly preferred.
- Certification, Training and Courses:
Mandatory Certifications (STCW & Indonesian):
• Valid STCW Certificates (Advanced Firefighting, Proficiency in Survival Craft, Medical First Aid, etc.).
• Advanced Crane Operation and Rigging/Lifting Planning Certifications (e.g., OPITO Appointed Person, Banksman/Slinger, Stage 3/4 Crane).
• Seafarer's Medical Certificate.
• Indonesian Specific Certifications: Familiarity with or willingness to obtain local certifications as required by Indonesian authorities.
Language: Fluent in English and Bahasa Indonesia
Required Competencies:
Technical Competencies
• Technical & Practical Skills: Excellent hands-on knowledge of deck operations, mechanical systems, and troubleshooting.
Non-Technical Competencies
• Strong Leadership & People Management: Ability to lead, motivate, and discipline a diverse multi-national crew.
• Safety Champion: Unwavering commitment to a "Safety First" culture. Deep understanding of risk assessment (JSA, TRA) and PTW systems.
• Communication & Collaboration: Excellent verbal and written communication skills in English. Proficiency in Bahasa Indonesia is a major advantage for managing the local crew and interfacing with authorities. Must be a team player capable of collaborating effectively with the OIM, Topside Production team, and other department heads.
• Problem-Solving: Ability to make sound decisions quickly under pressure, especially during emergency situations or operational upsets.
Working Conditions:
- Offshore/FPSO, rotational base.
- Possibility for business travel to other Eni premises or field areas
If you are interested in the position & meet the qualifications required, please send only your latest resume (in MS Word or PDF format with a size no more than 1 MB) to:
Recruitment.id@eni.com
Please mention the position title in the email subject: Apply for (position title)
Please note that applications may not be reviewed if received after 4 May 2026. Only shortlisted candidates will be notified.
Please be aware that Eni will never ask the applicant to pay any fee or appoint any travel agent for the selection process. All communications that ask the applicant to pay any fee or use a specific travel agent are fraudulent & scams. The application can only be sent through the above email.