PT AEL Indonesia; 10 Positions

PT AEL INDONESIA

PT AEL Indonesia is part of the AECI Mining Explosives, which is a leading developer, producer and supplier of commercial explosives, initiating systems and blasting services for mining, quarrying and construction markets in Africa and Indonesia.

We are currently seeking for best candidates to fill the following vacant positions:

1. Site Superintendent (Code : FLD – SUPT)

2. PIT Supervisor (Code : PITS-Supv)

3. Blaster 4 (Code : BLST 4)

4. Blaster 3 / Shotfirer (Code : BLST 3)

5. Plant Operator (Code: PLANT OPR)

6. Mechanic / Electrician (Code : MTC – MEC)

7. MMU Operator (Code : MMU)

8. Finance Administrator (Code: FIN ADM)

9. Technical Services Engineer (Code : TSE)

10.  Material Control Supervisor (Code : MCS)

 

SITE SUPERINTENDENT (CODE: FLD-SUPT)

To be based at Kalimantan Sites

Key Responsibilities:

• Work safely and responsibly in all tasks, perform a Take 5 risk assessment when performing any new or abnormal task, and ensure that all work colleagues are not exposed to any unsafe act or condition.

• To oversee PLTS/DTH/ROG activities in blast location and facilitate continues improvement to the daily operation.

• Ensure procedures remain up-to-date for all tasks and activities performed within his/her area or areas of responsibility and that all activities are preformed safely and in accordance with AEL policies and government legislation.

• Develop procedures for new tasks and activities before the task or activities are implemented.

• Actively engage with customer site management to establish effective communication processes for managing daily blasting activities.  This includes pre-planning of blast schedules and locations together with weekly and monthly forecasts that will assist the incumbent in effectively managing day to day operations and schedules.

• Actively engage with the customer to review and develop procedures/standards related to daily activities and implementing the best practices identified, this includes procedures for handling explosives, handling and treatment of misfires, delivering and control of explosives, security of explosives and blasting procedures.

• Obtain blast design one day prior to blasting from customer to verify it conformance with actual condition and/or gain approval from customer for any changes to the design.

• Conduct a daily meeting with customer to confirmed blast location and its status, blast design and production target and cascade to other supervisors, blasters, MMU operator, Manufacturing superintendent, site manager.

• Management of effective and efficient day-to-day blasting activity requirements. Coordinates and delegates works to team member before proceeding.

• Allocate the resources (MMU, bomb box, LV, Blasting Machines, personnel, radio communication) according to client production request.

• Develop and maintain customer relations with the early identification of changing customer needs and communication of such needs to the Site Managers.

• The incumbent must be aware of the account strategy and is expected to manage the plant and MMU accordingly.

• Auditing and monitoring blasting activities (PLTS/DTH/ROG) to facilitate continues improvement to the daily operation.

• Conduct regular audits on all activities within his/her area of responsibility to ensure correct application of procedures and standards and to identify areas of improvement.

• Provide on bench assistance, as required.

The Requirements:

• Education level and experiences :

Bachelor degree in mining with 6 years’ experience in mining explosive industry, Diploma in mining with minimum with 9 years in mining explosive industry, senior high school with minimum 13 years’ experience in mining explosive industry.

• Good communication skills as the incumbent are required.

• Must Held a General Driving License (SIM A).

• Hold a certificate of KJL 2 is must.

• Hold valid POP certification.

• Technical knowledge (Bulk explosive products, accessories type and application).

• Computer literate.

PIT Supervisor (CODE: PITS Superv)

To be based at Kalimantan Sites

Key Responsibilities:

• Ensure up-to-date procedure for down the blasting activity to ensure high level of work safety and effectiveness.

• Management of effective and efficient day-to-day blasting activity (PLTS) to meet all KPI’s as specified by custome.

• Develop and maintain customer relations with the early identification of changing customer needs and communication of such needs to the Site Managers.

• The incumbent to be aware of the account strategy and is expected to manage PLTS activity mccordingly.

• Report any deviation or variation in the production plan accuratelly and timely manner.

• Obtain planned blast location and status and blast design one day prior to blasting.

• Provide on bench assistance.

- Obtain planned blast location and status and blast design.

- Coordinates and delegates works to team members before proceeding.

- Give a consultative advice to client to treat anomalies in accordance with specified requirements (e.g: hot holes).

- Attend drill and blast meeting on blast location to coordinate with blast coordinator and other stake holder to mobilize equipment and personnel to a safe distance away from the blast area, deploy road blocker to close access and make blasting announcement 10 minutes before commencing.

- Advice MMU truck and LV Bomb box priorities.

- Ensure minimum two personnel in bomb box.

• Provide support at the blast location.

- Ensure all personnel working in the blast location follow the sign in and sign out as stipulated in the procedure.

- Ensure blast location security requirements are compliant (barricade, blast sign, etc).

- Ensure only authorized vehicle enter the blast area.

- Supervise site clean-up operations.

• Supervise the transporting explosive / accessories from magazine to the pit.

• Supervise the security of blast accessories on blast location. Securing explosives on bench NOT left unattended.

• Monitor pick up, carry and transport explosive and accessories (In hole and booster) on bench location.

• Ensure inventory control systems are accurately and correctly maintained. Prepare and record the accessories daily usage to avoid discrepancy.

• Conduct regular audit to the priming activity on bench promote best working practices.

• Report any incident causing primer defects, cut off, drop down to line manager.

• Establish and communicate access routes to blast location for authorized persons and vehicle. Assign a spotter to direct MMU operator while maneuvering on blast area.

• Obtain information from MMU operator on product gassing time before commencing stemming activity. Conduct regular audit to the stemming activity on bench promote best working practices.

• Audit tie up activity on bench and promote best working practices.

• Conduct inspection and create JSA to assess risk and danger on blast area that have potential drowning, flooding and land slide before distribute the surface detonator and conduct tie up.

• Supervise tie up activity on bench.

- Install delineation to establish boundary between tie up activity from charging activity as stipulated in the procedure.

- Supervise the distribution of surface detonator to the stemmed blast holes according to tie up design.

- Ensure tie up process start from the last hole on echelon row and control row as stipulated in the procedure.

- Check and make sure all shock tubes are completely inside the surface detonator’s connector block.

- Ensure the connection is tidy and connector block is placed consistently to one side close to blast holes.

- Tie initiation point to wooden stick as stipulated in the procedure.

- Ensure the colored ribbon attached to the connection.

- Record the personnel involved in the tie up process and colored ribbon used.

- Ensure blaster 3 has secured the unused explosives into bomb box and return to magazine

• Supervise final inspection activity on bench.

- Monitoring/PJO/Audit final check activity on bench.

- If required, Conduct final check to all connected blast holes as stipulated in the procedure:

o Make sure stemming materials in hole are full and packed. Re-stemming if needed.

o Make sure blast holes are tied up according to blast design as instructed by customer.

o Make sure all shock tube are inside connector block

o Make sure all shock tube are tied up with appropriate slack.  

- When carrying final check, a colored ribbon must be attached to the connection on control row and as a marker on echelons.

- Ensure the colored ribbon attached to the connection.

- Conduct final check with correct sequence, start from the last hole (to blast) in echelon row in a direction to control row and from the last hole in control row to the initiation point (IP).

• Audit Extend and connecting LIL activity and promote best working practices. Create JSA when using LV to extend the LIL to comply to specific requirements as stipulated in the procedure.

• Audit firing a Blast Area activity and promote best working practice

• Carry out audit for post blast inspection and coordination activity. Check and signed of the blast report and submit it to field service superintendent. If required, carry out post blast inspection and coordination.

• Safe Handle of Misfires

• Attend meeting with customer and relevant parties on bench to determine on how to handle a misfire.

• Handle misfire or suspected misfire discovered at time of post firing.

• Handle explosives uncovered during the excavation process

• Dealing with a misfired explosives charge

• Handle Misfires in hot ground

The Requirements:

• Education level: Senior high school with minimum 5 years experience as shotfirer, Diploma in mining with minimum 1 years experience as shotfirer.

• Have an experience working in an explosive company

• Good communication skills as the incumbent is required.

• Must Held a General Driving License, “A” Driving License and obtain Bomb box LV Kimper.

• Hold a certificate of KJL 2 is must.

• Hold valid POP certification.

• Technical knowledge (accessories type and application)

• Computer literate.

BLASTER 4 (CODE: BLST 4)

To be based at Kalimantan Sites (Supervisor level)

Key Responsibilities:

• The responsibilities listed in this section apply to the incumbent who is the accountable person for these activities however he/she may physically be required to carry out these tasks or he/she may also supervise these tasks being carried out within his/her area of responsibility.  The incumbent remains accountable either way.

• Work safely and responsibly in all tasks, perform a Take 5 risk assessment when performing any new or abnormal task, and ensure that all work colleagues are not exposed to any unsafe act or condition.

• Learn and know all site procedures and standards related to all explosives/charging/blasting activities on the site that he is employed at. 

• Prepare blast site for blasting activities as per site procedures and standards.

• Periodically may be required to act as location keeper if there are more than one blast locations.  The “Blaster 4” may be appointed as a “Blaster on duty” on more than one location (As per site specific procedure).

• Obtain and understand the blast plan per blast location that indicates the blast design and tie up.

• Conduct a risk assessment on every blast location assigned to him/her and identify risk associated with on bench activities.

• Report and give consultative advice to client or supervisor to treat anomalies in accordance with specified requirements (e.g.: hot holes).

• Record all deviations between the actual on bench blast design compared to the planned blast design on the blast plan and report any blast design deviations to the supervisor/customer.

• The incumbent may be required to self asses and change the blast design due to variations identified in 3.4.6.  These changes must be signed off by the customer/supervisor.

• Inspect and make sure tools, material and equipment required in the PLTS/DTH/ROG activities are in good working order and fit for purpose.

• Supervise site clean-up operations.

• Sign in and isolating blast area in accordance with procedures and blast plan

• Ensure the correct storing and transporting of explosives and accessories in accordance with site procedures/standards and applicable legislation within the areas assigned to him/her.

• Identify and calculate the amount of explosives and accessories to be used per blast location and communicate the information to the relevant personnel who are responsible for delivering the explosives and accessories to the blast location.

• Supervise Accessories placement, handling and application within the blast area in accordance with procedures and applicable legislation.

• Carry out priming activities in accordance with procedures and applicable legislation

• Conduct PJO and/or assessment of quality of priming activity on the blast location.

• Supervise bulk explosives charging activities and ensure that charging is done in accordance with site procedures/standards and applicable legislation

• Supervise stemming activities to ensure compliance with site procedures/standards and applicable legislation.

• Carry out blast Tie Up Activities as per the blast design and must have be capable of correcting the blast tie up design if the actual blast hole positions deviate from the planned blast design.

• Conduct a final on bench Inspection of the blast area to ensure all activities have been correctly carried out according to standard.

• Prepare the blast for initiation.  (Using Nonel/electronic/electric initiating systems)

• Ensure that a blast is safe to initiate and carry our blast initiation as per site procedures and applicable legislation.

• Conduct a thorough inspection at all blasted locations under his/her responsibility to identify any potential risks or explosives that have failed to detonate as required in the post blast check.

• Treat misfires according to site procedures and applicable legislation

• Prepare and complete all daily blast reports.

• Drive LV and transport personnel on site as per site standards and rules.

• Support and assist with any abnormal site activity should this become necessary in any emergency situation.

• Required to tie up a blast with non-electric and electronic initiating systems.

The Requirements:

• Education level: Diploma in mining with minimum 3 years of experience as shotfirer, or Senior high school with minimum 7 years of experience as shotfirer.

• Have an experience working in an explosive company

• Good communication skills.

• Must be the holder of a General Driving License, “A” Driving License.

• Certificate of KJL 2 is must.

• Hold KIM is a must.

• Hold valid POP certification.

• Technical knowledge (blast design, bulk explosive product and blast accessories)

• Computer literate.

• Have a good understanding of explosives products and initiating systems including non-electric and electronic systems

BLASTER 3 / SHOTFIRER (CODE: BLST 3)

To be based at Kalimantan Sites

Tanggung Jawab Utama:

• Menyimpan dan mengangkut bahan peledak dan aksesoris

• Bekerja secara aman dan bertanggung jawab dalam semua tugas

• Menyampaikan informasi mengenai volume dan jadwal pengiriman kepada personil site

• Menyampaikan informasi kepada Magazine Keeper mengenai jumlah dan jenis bahan peledak/aksesoris yang akan digunakan

• Memastikan LV Bomb Box layak untuk digunakan dengan cara melaksanakan pengecekan dan pemeriksaan wajib sesuai dengan prosedur dan peraturan perundangan yang berlaku di site

• Melakukan pemeriksaan pada pemisahan Bomb Box dari aksesoris dan bahan peledak untuk mencegah terjadinya ledakan yang tidak disengaja

• Memastikan semua bahan peledak/aksesori ditangani dengan hati-hati/diangkut dan dikemas sesuai dengan prosedur/standar untuk mencegah terjadinya kerusakan atau ledakan yang tidak disengaja

• Mengoperasikan LV Bomb Box secara aman sesuai dengan prosedur.

• Mendistribusikan jumlah aksesoris peledakan yang benar ke setiap lokasi peledakan sesuai dengan perencanaan

• Pemegang jabatan mungkin harus bertindak di posisi lain atau dapat ditunjuk sebagai “Blaster on Duty” apabila diperlukan

• Pemegang jabatan bertanggung jawab atas keamanan bahan peledak yang diterima dan yang dikeluarkan

• Mencatat dan menyimpan/menjaga semua dokumen penerimaan dan pengeluaran bahan peledak dan memastikan pencatatan semua bahan peledak/aksesoris dilakukan setiap hari

• Melaksanakan atau mengawasi kegiatan priming, stemming, tie up, final check sesuai dengan prosedur/standar/aturan perundangan yang berlaku di site

• Membentangkan, menyiapkan dan menyambungkan LIL untuk kegiatan peledakan sesuai dengan prosedur/standar/aturan perundangan yang berlaku di site

• Membersihkan lokasi peledakan dari LIL bekas pasca ledakan dan mengirimkan ke lokasi pembuangan sesuai dengan prosedur yang berlaku di site

• Melaksanakan atau membantu inspeksi pasca ledakan sesuai dengan prosedur yang berlaku di site

• Melakukan penanganan misfire secara aman sesuai dengan prosedur/standar/aturan perundangan yang berlaku di site

• Mengamankan dan menangani bahan peledak yang ditemukan selama penggalian sesuai dengan prosedur/standar/aturan perundangan yang berlaku di site

• Melakukan kegiatan tie up dengan sistem inisiasi elektronik dan non-elektronik

Persyaratan:

• Diploma jurusan pertambangan dengan minimum pengalaman 3 tahun sebagai shotfirer, atau Sekolah Menengah Umum dengan minimum pengalaman 7 tahun sebagai shotfirer

• Memiliki pengalaman bekerja di perusahaan peledakan

• Memiliki keterampilan komunikasi yang baik

• Memiliki SIM A

• Wajib memiliki sertifikat KJL II dan atau KPP Madya

• Memiliki KIM

• Pengetahuan teknis (desain peledakan, produk explosive/bahan peledak curah, dan aksesoris peledakan)

• Memiliki pemahaman yang baik tentang produk bahan peledak dan sistem inisiasi elektronik maupun non-elektronik.

PLANT OPERATOR (CODE: PLANT OPR)

To be based at Kalimantan Sites

Tanggung Jawab Utama:

• Ketepatan dan ketelitian dalam melengkapi lembar-lembar pencatatan.

• Menjaga kebersihan  dalam semua kegiatan operasional.

• Memuat dan membongkar bahan baku yang digunakan di tempat pengolahan.

• Pengaturan keluar masuk  bahan mentah dan produk  berdasarkan  First-In-First-Out (yang pertama masuk, juga pertama keluar).

• Memastikan semua pengiriman  produk secara  OTIF (On Time in Full = tepat waktu secara utuh).

• Meniadakan  pengulangan pekerjaan atau pemborosan produksi yang tidak perlu.

Persyaratan:

• Sekolah Menengah Atas dengan minimal 6 tahun pengalaman, atau D3 dengan  minimal 3 tahun pengalaman

• Memiliki SIO Forklift dan Boiler

• Pemegang sertifikat Kompetensi Juru Ledak 2 (KJL2) dan atau KPP Madya

• Mempunyai SIM B2

MECHANIC / ELECTRIAN (CODE: MTC -MEC)

To be based at Kalimantan Sites

Tanggung Jawab Utama:

Mechanic

• Menyediakan dukungan dan keahlian dalam hal maintenance dan pengoperasian alat berat

• Teknologi manufacturing

• Melaksanakan inspeksi dan perbaikan mekanis yang diperlukan untuk fixed plant dan charging unit.

• Memonitor dan memeriksa standar pekerjaaan yang dilakukan oleh kontraktor serta memberikan masukan kepada atasan langsung

Electrician

• Memastikan availability peralatan listrik setiap saat dengan melakukan perbaikan terhadap kerusakan elektrik

• Memastikan semua titik elektrik aman bagi para karyawan pengguna dengan menerapkan Standar Keselamatan Perusahaan yang sesuai.

• Memastikan availability daya listrik dengan segera menangani kerusakan kelistrikan.

• Bekerja sesuai Standar Perusahaan.

• Melaksanakan maintenance terhadap instrumen dan pebraikan semua peralatan.

Persyaratan:

• Minimum 21 tahun

• SMK jurusan Otomotif & Elektrik dengan pengalaman minimum 3 tahun atau D3 dengan pengalaman minimum 1 tahun

• Diutamakan yang memiliki SIM B2

• Pengetahuan teknis, termasuk sistem pneumatik dan hidrolik

MMU OPERATOR (CODE: MMU)

To be based at Kalimantan Sites

Tanggung Jawab Utama:

• Mempersiapkan MMU/ANFO truck untuk operasi harian sesuai prosedur dan standar yang berlaku di site

• Bertanggung jawab untuk mengoperasikan MMU/ANFO truck dengan aman dalam kegiatan mengemudi, pemuatan (loading), pengisian (charging) dan re-filling sesuai prosedur dan standar yang berlaku di site

• Bertanggung jawab untuk memastikan MMU/ANFO truck dirawat dengan benar serta melakukan pemeliharaan rutin dan teratur agar MMU/ANFO truck tetap berada dalam kondisi yang baik

• Bertanggung jawab untuk memastikan kuantitas dan kualitas produk yang dikirim berada dalam spesifikasi kualitas yang disyaratkan sesuai dengan permintaan site/pelanggan

• Bertanggung jawab untuk memastikan kalibrasi MMU/ANFO truck dilakukan sesuai prosedur dan kalibrasi dilakukan pada interval sesuai dengan yang ditentukan oleh pelanggan/ manajemen site

• Mencatat volume bahan peledak curah yang dipompa sesuai dengan prosedur

• Mematuhi semua tindakan pencegahan untuk keamanan agar risiko paparan bahan kimia dapat dikurangi

• Melaporkan segala penyimpangan atau kondisi tidak aman kepada Supervisor yang bertugas

• Melakukan perbaikan kecil pada MMU/ANFO truck termasuk membantu mekanik site untuk melakukan perbaikan seperti mengganti selang hidrolik, membersihkan penyumbatan dalam proses, mengeluarkan dan mengganti komponen

• Melakukan troubleshooting pada MMU/ANFO truck untuk mengidentifikasi dan melaporkan cacat/kerusakan ke tim Engineering/Maintenance.

Persyaratan:

• Tingkat pendidikan: Sekolah Menengah Atas

• Mempunyai pengalaman minimum 5 tahun sebagai operator truck ukuran medium, Scania, MAN atau Volvo

• Familiar dengan proses mobile manufacturing pada industri peledakan

• Memiliki keterampilan komunikasi yang baik

• Memiliki SIM B2 untuk memperoleh Kimper MMU

• Memiliki sertifikat KJL 2

• Memiliki SIO Crane dan SIO Forklift

FINANCE ADMINISTRATION (CODE: FIN-ADM)

To be based at Jakarta Office

Key Responsibilities:

• Prepare Report Balance Update Bank IDR and USD Excel and Email to Finance Director Every Morning

• Prepare Report Daily Cash Balance Excel, Asking Approval FM/FD and Email to AECI Managing Director

• Receive Soft Copy Invoice From AEL GMAIL Cloud, Prepare List Invoice, Filling  and send to Tax Accountant

• Receive Original Invoice from Supplier and Filling Payment within Invoice

• Receive EFT Payment from Tax Accountant and Filling

• Receive EFT Beacukai from Tax Accountant, Create Payment Beacukai in SCB and Filling

• Receive Rekening Supplier From Procurement, do Phone Verification Rekening and SoftCopy Filling

• Checking available Original Invoice and if not received, do asking to Supplier

• Prepare List Invoice Issue Report and Send to Tax Accountant

• Attending Weekly Meeting Finance

• Prepare Recon WHT,SSP, Payment WHT, Reporting WHT, Send Bukti Potong WHT to Supplier dan Filling WHT

• Prepare Recon VAT, Payment VAT,Laporan VAT dan and VAT

• Attending Monthly Meeting Finance Purchasing

• Prepare Surat Kuasa Tarik Tunai for BPJS Kesehatan and Electricity House of GM

• Prepare Rekon Sewa Mobil for Payment Report

• Evaluation Jobdesk with Tax Accountant

• Assisting Finance Audit

• Assisting Tax Audit

• Assisting Internal Audit

• Stock Take to Kalimantan

The Requirements:

• Minimum 1 years of experience in Finance role

• Advanced proficiency of Microsoft Office especially excel

• Understand in English (speaking & writing)

• Familiar with SAP ECC will be preferred

TECHNICAL SERVICE ENGINEER (CODE: TSE)

To be based at Sites

Key Responsibilities:

Technical Expertise

• Relevant knowledge of products and applications.

• Able to design general production blast designs.

• Understands the suitability and applicability of data collection and blast monitoring techniques.

• Competent use of relevant blasting models.

• Thorough understanding of mining techniques.

• Regularly performs cost analysis of drill & blast function.

• Understands influence of D & B costs on mining costs.

• Able to handle blasting related investigations and seeks assistance where necessary, and seeks approval for implementing solutions.

• Involved in field trialing of new products.

Business Effectiveness

• Understands how Technical Services, Operations and the Mining Optimisation Group service the customer as a team.

• Recognises opportunities for improvement at customer sites and input into key account plans as required.

• Delivers agreed T.S. activities under guidance.

• Understands AEL Mining Services market strategy.

• Documents the benefits of Technical Service work on a regular basis.

• Understands level of risk related to drilling & blasting.

• Understands function of cross-functional local business team.

• Have Technical Service accountabilities for accounts.

• Is aware of competitor products and services and communicates, as appropriate.

Personal And Management Effectiveness

• Communicates effectively within the company and with customers.

• Works effectively in a team.

• Works essentially unsupervised and is responsible for timely completion of projects.

• Makes effective use of own time. Contributes to Technical Service plan in local business unit.

• Defines plans and completes projects at responsible accounts with assistance.

• Adept at technical report writing.

Customer relationship & communication

• Develops customer relationships with foremen, shotfirers and engineers.

• Able to present all training content related to his position

• Able to present at on-site training courses.

• Demonstrates appropriate customer service attitude.

The Requirements:

• Education, Experience, Certificate:

S1 Mining Engineer and have minimum 3 years’ experience in mining/explosives industry.

• A Driving License (SIM A).

• Able to speak and write in English.

MATERIAL CONTROL SUPERVISOR (CODE: SCM - MCS)

To be based at Office

Tanggung Jawab Utama:

Implement Material & Inventory Control activities in compliance with the prevailing procedures with regard to:

• Melaksanakan pendataan Material & Inventory Control sesuai prosedur yang berlaku dalam hal:

• Mengontrol pembelian dan pengiriman barang inventory dan Raw Material.

• Pengeluaran barang inventory & RM.

• Penerimaan barang inventory, RM dan inspection report.

• Membuat forecast bulanan untuk RM

• Stock take.

• PR Implementation Control.

• Evaluation & variance of Inventory.

• Review Min – Max Inventory Level.

• Pembuatan Laporan Bulanan terkait kegiatan Material Control.

• Membuat data evaluasi supplier Acceptance Lots berdasarkan dokumen Receiving Inspection Report dan di serahkan ke Purchasing Coordinator.

• Berkoordinasi dengan Site Manager, Finance, Maintenance dan Engineering.

• Bekerja sama dengan team site (Maintenance team) untuk pelaksanaan stock taking.

Persyaratan :

• Pendidikan, Pengalaman, Sertifikasi:

• S1 semua jurusan

• Memiliki pengalaman sedikitnya 3 tahun di bidang MC

• Memiliki pengetahuan yang baik mengenai pasar komoditas bahan baku di Indonesia aktivitas pembelian, pembelian, pajak, prosedur wajib dan umum, peraturan dan regulasi export import serta peraturan dan regulasi custom clearance.

• Pengalaman di industry peledakan merupakan keuntungan tapi tidak disyaratkan.

• Memiliki keahlian komputer, dapat mengoperasikan MS Excell di level intermediate/advance.

• Lebih disukai dengan kemahiran berbahasa inggris baik lisan maupun tulisan

• Memiliki keahlian analisa dan kepemimpinan yang kuat.

Please put [POSITION CODE – YOUR NAME] as email subject. Only short listed candidates will be notified for interview.

Interested candidates are encouraged to submit their application letter and CV by 31 Januari 2022 to the following address:

Aelindo.Recruitment@aeciworld.com