PT. CTCI International Indonesia; 10 Positions
Posting date: August 06, 2026 - Expiry Date: August 20, 2026
PT. CTCI International Indonesia, a subsidiary of the CTCI Group, aims to become a leading international provider of EPC in Indonesia. Currently offering opportunities to join in the following positions:
HVAC Lead Engineer
Duties and Responsibilities:
1. Lead and coordinate HVAC engineering design activities for assigned projects or specific project scopes, including planning, monitoring, and controlling the progress and quality of design work.
2. Define and maintain clear project scope requirements and coordinate any scope modifications through the established change management process.
3. Review project requirements, technical specifications, applicable codes and standards, HVAC calculations, drawings, and engineering quantities, and participate in design reviews and quality assurance processes to ensure compliance with project and client requirements.
4. Support project planning and execution by participating in project meetings, preparing progress reports, performing design verification, and ensuring timely completion of engineering deliverables.
5. Design HVAC systems for commercial buildings and industrial facilities, including ducting systems, chilled water systems, cooling water systems, associated electrical power supply, and control systems.
6. Develop HVAC engineering deliverables, including Design Basis, Specifications, Datasheets, Piping and Instrumentation Diagrams (P&ID), Ducting Instrumentation Diagrams (D&ID), Airflow Diagrams, engineering calculations, HVAC layouts, ducting drawings, equipment schedules, and other design documentation required for project execution.
7. Perform heating and cooling load analyses, pressure drop calculations, duct sizing, equipment sizing, and psychrometric analysis using Carrier HAP and other applicable engineering tools.
8. Perform HVAC equipment selection and technical evaluation for major equipment, including Air Handling Units (AHU), Fan Coil Units (FCU), chillers, cooling towers, pumps, fans, and other HVAC systems.
9. Prepare technical requisitions, Material Take-Off (MTO), engineering quantity take-offs, bid evaluations, and provide technical support during procurement and subcontracting activities.
10. Collaborate with multidisciplinary engineering teams, including Process, Piping, Electrical, Instrumentation and Control, Civil, and Structural disciplines, to achieve fully integrated engineering solutions.
11. Lead the preparation of technical inputs during bidding activities and support project execution to meet quality, schedule, and cost objectives.
12. Prepare technical responses to client comments, review sheets, and coordinate the timely resolution of engineering review comments.
13. Provide technical support throughout procurement, construction, pre-commissioning, commissioning, and start-up activities, including technical clarification, vendor coordination, and site engineering support.
14. Conduct site visits, field surveys, testing, and commissioning activities, review site conditions, resolve technical issues, and provide engineering support during construction.
15. Proactively identify technical risks, engineering issues, and interface problems, and implement corrective and preventive actions to minimize project impact.
16. Contribute to continuous improvement initiatives, including the development of engineering standards, work instructions, design guidelines, best practices, and value engineering proposals.
17. Provide technical leadership, mentorship, and supervision to junior and intermediate engineers and designers, ensuring the quality, consistency, and timely delivery of engineering work.
Qualifications, Skills and Competencies:
1. Bachelor’s degree in mechanical or HVAC engineering.
2. Minimum of 9 years of experience in engineering consultant, EPC contractor or HVAC vendor.
3. Minimum of 2 years of experience as lead engineers or other project management positions.
4. Experience in engineering design, bidding, procurement support, and project execution.
5. Experience in FEED is an advantage.
6. Experience in industrial facilities, power plants, petrochemical, oil & gas, semiconductors, pharmaceutical, or high-tech facility projects is an advantage.
7. Strong understanding of HVAC engineering principles, design methodologies, and industry best practices.
8. Ability to perform HVAC cooling and heating load calculations, pressure drop calculations, duct sizing, equipment sizing and selection, and psychrometric analysis.
9. Ability to prepare Piping and Instrumentation Diagrams (P&ID), Airflow Diagrams, and Ducting Instrumentation Diagrams (DID).
10. Knowledge of chilled water and cooling water systems, including pipe sizing, pipe selection, hydraulic calculations, and installation practices.
11. Familiar with ASHRAE standards and industry practices, including relevant local regulations.
12. Ability to coordinate multidisciplinary engineering interfaces and resolve cross-functional technical issues.
13. Proficient in Carrier HAP design software.
14. Proficient in AutoCAD.
15. Experience with Autodesk Revit is an advantage.
16. Good understanding of construction methods and practices.
17. Strong leadership and mentoring skills.
18. Excellent problem-solving and analytical skills.
19. Strong interpersonal skills with a professional attitude, consistent performance, and strong attention to detail.
20. Proficient in English, both written and verbal.
21. Willing to be dispatched overseas or domestic sites for project support if required.
HVAC Check Engineer
Duties and Responsibilities:
1. Collaborate with the HVAC Lead Engineer to align project objectives, design scope, priorities, and engineering deliverables.
2. Review project requirements, technical specifications, applicable codes and standards, HVAC calculations, drawings, and engineering quantities, and participate in design reviews and quality assurance activities to ensure compliance with project and client requirements.
3. Support project planning and execution by participating in project meetings, monitoring assigned design activities, performing design verification, and ensuring timely completion of engineering deliverables.
4. Design HVAC systems for commercial buildings and industrial projects, including ducting systems, chilled water systems, cooling water systems, associated electrical power supply, and control systems.
5. Develop and review HVAC engineering deliverables, including Design Basis, Specifications, Datasheets, Piping and Instrumentation Diagrams (P&ID), Ducting Instrumentation Diagrams (D&ID), Airflow Diagrams, engineering calculations, HVAC layouts, ducting drawings, equipment schedules, and other design documents required for project execution.
6. Perform heating and cooling load analyses, pressure drop calculations, duct sizing, equipment sizing, and psychrometric analysis using Carrier HAP and other applicable engineering tools.
7. Perform HVAC equipment selection and technical evaluation for major equipment, including Air Handling Units (AHU), Fan Coil Units (FCU), chillers, cooling towers, pumps, fans, and other HVAC equipment.
8. Prepare technical requisitions, Material Take-Off (MTO), engineering quantity take-offs, bid evaluations, and provide technical support during procurement and subcontracting activities.
9. Collaborate with multidisciplinary engineering teams, including Process, Piping, Electrical, Instrumentation and Control, Civil, and Structural disciplines, to achieve fully integrated engineering solutions and resolve interface issues.
10. Contribute to the preparation of technical input during bidding activities and support execution to meet defined timelines and cost targets.
11. Prepare technical responses to client comments and review sheets, and coordinate the resolution of engineering review comments.
12. Provide technical support throughout procurement, construction, pre-commissioning, and commissioning phases, including vendor coordination, technical clarification, and site engineering support.
13. Assist in site surveys, testing, commissioning, and construction activities by reviewing site conditions, responding to technical queries, and supporting issue resolution.
14. Proactively identify technical issues and risks and take both corrective and preventive actions to resolve and mitigate them.
15. Contribute to continuous improvement within the discipline and organization, including development of work instructions, design guidelines, and value engineering initiatives.
16. Provide technical guidance and coordinate assigned designers or junior engineers to ensure the quality and timely completion of engineering deliverables.
Qualifications, Skills and Competencies:
1. Bachelor’s degree in mechanical or HVAC engineering.
2. Minimum of 6 years of experience in engineering consultant, EPC contractor, or HVAC Vendor.
3. Experience in bidding, procurement support, and project execution is an advantage.
4. Experience in FEED is an advantage.
5. Experience in industrial facilities, power plants, petrochemical, semiconductor, pharmaceutical, or high-tech facility projects is an advantage.
6. Good understanding of HVAC engineering principles, design methodologies, and industry best practices.
7. Ability to perform HVAC cooling and heating load calculations, pressure drop calculations, duct sizing, equipment sizing and selection, and psychrometric analysis.
8. Ability to prepare and review Piping and Instrumentation Diagrams (P&ID), Airflow Diagrams, Ducting Instrumentation Diagrams (D&ID), HVAC layouts, and other engineering drawings.
9. Knowledge of chilled water and cooling water systems, including pipe sizing, pipe selection, hydraulic calculations, and installation practices.
10. Familiar with ASHRAE standards and industry practices, including relevant local regulations.
11. Good understanding of construction methods, commissioning activities, and multidisciplinary engineering coordination.
12. Proficient in Carrier HAP design software.
13. Proficient in AutoCAD.
14. Experience with Autodesk Revit is an advantage.
15. Excellent problem-solving and analytical skills.
16. Strong interpersonal skills with strong attention to detail.
17. Proficient in English, both written and verbal.
18. Willing to be dispatched overseas or domestic sites for project support if required.
Civil and Structure Check Engineer
Duties and Responsibilities:
1. Collaborate with the Civil & Structure Lead Engineer to align the design scope and objectives.
2. Review project requirements, technical specifications, and applicable codes and standards, and participate in design reviews and quality assurance processes to ensure compliance.
3. Support project planning and execution by engaging in relevant meetings, performing necessary quality assurance and design verification activities.
4. Assist in developing civil and structural design deliverables (Engineering Drawing Index/List).
5. Prepare technical specifications and general civil structures design requirements.
6. Prepare and review the calculation sheets, models, design drawing, and other design documents.
7. Analyze configurations of the basic components of a structure.
8. Review and manage the bill of quantities for materials.
9. Ensure all the design results follow construction safety guidelines.
10. Ensure all designs compliance with applicable codes, regulations, and industry standards.
11. Obtain planning and/or building regulations approval.
12. Coordinate and supervise multi-disciplinary teams, vendors, and subcontractors to deliver project milestones successfully.
13. Supervise and coach design engineers.
14. Contribute to the preparation of technical input during bidding activities and support execution to meet defined timelines and cost targets.
15. Proactively identify technical issues and risks and take both corrective and preventive actions to resolve and mitigate them.
16. Support continuous improvement of the department and the Company (development of document templates, guidelines, clarification of interfaces etc.)
Qualifications, Skills and Competencies:
1. Bachelor's degree in civil or structural engineering.
2. Minimum of 5-10 years of related experience with at least 5 years in oil and gas industry or industrial plant project.
3. Technically knowledgeable of the practical application of structural engineering including analysis for structural supports, loads, and design integrity.
4. Strong knowledge of EPC process execution (FEED, basic engineering design, detailed engineering design, procurement, construction)
5. With experiences in general civil engineering and structural design, such as road & paving, storm water drainage system, static & dynamic equipment foundations, building and shelter structures, piperack structures, equipment supporting structures, R.C storage tank & basin.
6. Good knowledge of construction methods, materials, and local legal regulations.
7. Software Skills: (1) EXCEL; (2) PowerPoint; (3) WORD; (4) Auto CAD; (5) REVIT; (6) SAP 2000 or STAAD Pro; Foundation Mat 3D & F3D.
8. Familiarity with design codes and standards such as SNI, IBC, ASCE 7, AISC, and ACI 318.
9. Proficient in English, both written and verbal. Mandarin is a plus.
10. Analytical thinker with strong problem-solving skills.
11. Having good interpersonal skills, professional manner, consistency, and detail oriented.
12. Certificate of Competence with qualification Associate Expert in Building Engineering (optional).
13. Willing to be dispatched overseas or domestic sites for project support if required.
Additional Requirements:
1. Own the ability to review design specifications and check calculation.
2. Provide technical advice on safe designs and construction.
3. Take charge of control design schedule/progress within the responsible scope of work.
4. To be responsible for the checker position of a completed EPC project (medium to large scale)
5. Project, Management, or Site Experience is required.
Architecture Check Engineer
Duties and Responsibilities:
1. Prepare architectural design drawings, layouts, specifications, and technical documents.
2. Independently execute assigned engineering scope and deliverables.
3. Coordinate architectural works with civil, structural, mechanical, and electrical disciplines.
4. Review project requirements, technical specifications, and applicable codes/standards.
5. Perform design calculations, technical studies, and material selection.
6. Support construction activities by responding to technical queries and reviewing site conditions.
7. Participate in design review meetings and technical discussions.
8. Ensure quality and accuracy of engineering deliverables before submission.
9. Monitor assigned engineering schedules and report progress status.
Qualifications, Skills and Competencies:
1. Bachelor’s degree in Architectural Engineering; Master’s Degree is an advantage.
2. Minimum of 6 years of relevant experience in architectural design, industrial, data center, or large-scale development projects; experience in EPC projects is an advantage.
3. Good understanding of design coordination, technical documentation, building regulations, and construction processes.
4. Proven experience leading architecture teams or coordinating multidisciplinary project teams.
5. Proficient in AutoCAD, Revit, SketchUp, and BIM coordination or other relevant architectural design tools.
6. Experience in FEED projects is an advantage.
7. Good understanding of building codes, standards, and construction methods.
8. Strong communication skill in English, both written and verbal.
9. Experience working with international consultant, engineering consultant, developers is an advantage.
10. Membership in IAI or possession STRA/SKK Architect certification is an advantage.
11. Willing to be dispatched overseas or domestic sites for project support if required.
Electrical Lead Engineer
Duties and Responsibilities:
1. Lead and coordinate electrical engineering design activities for assigned projects or specific project scopes.
2. Define and maintain clear project scope requirements and coordinate any scope modifications through the established change management process.
3. Review project requirements, technical specifications, and applicable codes and standards, and participate in design reviews and quality assurance processes to ensure compliance.
4. Support project planning and execution by engaging in relevant meetings, preparing progress reports, and performing necessary quality assurance and design verification activities.
5. Design, planning, and site commissioning of electrical power systems, power and grounding systems, lighting systems, low energy systems and technical bid evaluation for electrical equipment for large-scale engineering projects.
6. Development of electrical power distribution concept, single line diagram, and schematic diagram.
7. Preparation of specifications and data sheets for electrical equipment (e.g. GIS, Power Transformer, MV/LV Switchgear/MCC, Power SCADA system, Emergency Generator, AC UPS/DC Charger, VFD etc.)
8. Review vendor document for above-mentioned electrical equipment
9. Conduct power system analyses using ETAP software, including load flow studies, short circuit calculations, arc flash assessments, and harmonic analysis.
10. Collaborate with multidisciplinary engineering teams, including process, mechanical, piping, instrumentation and control, to achieve fully integrated system design and execution.
11. Lead the preparation of technical input during bidding activities and support execution to meet defined timelines and cost targets.
12. Provide technical input and support throughout procurement, construction, and commissioning phases.
13. Assist in testing and commissioning activities, including site visits and surveys, and provide technical support during construction by addressing site queries and reviewing on-site conditions.
14. Proactively identify technical issues and risks and take both corrective and preventive actions to resolve and mitigate them.
15. Contribute to continuous improvement within the discipline and organization, including development of work instructions, design guidelines, and value engineering initiatives.
16. Provide mentorship, technical guidance, and training to junior and intermediate engineers to build team capability and competencies.
Qualifications, Skills and Competencies:
1. Bachelor’s degree in electrical engineering.
2. Minimum of 9 years of experience in electrical system design for FEED or EPC Project.
3. Minimum of 2 years of experience as lead engineers or other project management positions.
4. Experience in bidding and project execution activities.
5. Good understanding of electrical engineering fundamentals, including circuit design and electronic systems.
6. Familiar with IEC standards and industry practices, including relevant local regulations.
7. Proficient in relevant electrical engineering tools (e.g., ETAP, Dialux Evo, AutoCAD, or other power study simulation software).
8. Good understanding of construction methods and practices.
9. Strong leadership and mentoring skills.
10. Excellent problem-solving and analytical skills.
11. Strong interpersonal skills with a professional attitude, consistent performance, and strong attention to detail.
12. Fluent in English listening, speaking, reading, and writing, with the ability to independently interact with foreign clients.
13. Certificate of Competence with qualification Senior Expert in Electrical Engineering (optional).
14. Willing to be assigned to the site if project is required.
15. Requires experience in overseas site commissioning across various countries.
Electrical Check Engineer
Duties and Responsibilities:
1. Collaborate with the Electrical Lead Engineer to align the design scope and objectives.
2. Review project requirements, technical specifications, and applicable codes and standards, and participate in design reviews and quality assurance processes to ensure compliance.
3. Support project planning and execution by engaging in relevant meetings, performing necessary quality assurance and design verification activities.
4. Design, planning, and site commissioning of electrical power systems, power and grounding systems, lighting systems, low energy systems and technical bid evaluation for electrical equipment for large-scale engineering projects.
5. Development of electrical power distribution concept, single line diagram, and schematic diagram.
6. Preparation of specifications and data sheets for electrical equipment (e.g. GIS, Power Transformer, MV/LV Switchgear/MCC, Power SCADA system, Emergency Generator, AC UPS/DC Charger, VFD etc.)
7. Review vendor document for above-mentioned electrical equipment.
8. Develop and review electrical engineering documents, including drawings, specifications, calculations, design documents, and schedules.
9. Conduct power system analyses using ETAP software, including load flow studies, short circuit calculations, arc flash assessments, and harmonic analysis.
10. Collaborate with multidisciplinary engineering teams, including process, mechanical, piping, instrumentation and control, to achieve fully integrated system design and execution.
11. Contribute to the preparation of technical input during bidding activities and support execution to meet defined timelines and cost targets.
12. Provide technical input and support throughout procurement, construction, and commissioning phases.
13. Assist in testing and commissioning activities, including site visits and surveys, and provide technical support during construction by addressing site queries and reviewing on-site conditions.
14. Proactively identify technical issues and risks and take both corrective and preventive actions to resolve and mitigate them.
15. Contribute to continuous improvement within the discipline and organization, including development of work instructions, design guidelines, and value engineering initiatives.
Qualifications, Skills and Competencies:
1. Bachelor’s degree in electrical engineering.
2. Minimum of 6 years of experience in electrical system design for FEED or EPC Project.
3. Experience in bidding activities is an advantage.
4. Good understanding of electrical engineering fundamentals, including circuit design and electronic systems.
5. Familiar with IEC standards and industry practices, including relevant local regulations.
6. Proficient in relevant electrical engineering tools (e.g., ETAP, Dialux Evo, AutoCAD, or other power study simulation software).
7. Good understanding of construction methods and practices.
8. Excellent problem-solving and analytical skills.
9. Strong interpersonal skills with strong attention to detail.
10. Fluent in English listening, speaking, reading, and writing, with the ability to independently interact with foreign clients.
11. Certificate of Competence with qualification Associate Expert in Electrical Engineering (optional).
12. Willing to be assigned to the site if project is required.
13. Requires experience in overseas site commissioning across various countries.
Project Procurement Coordinator
Duties and Responsibilities:
1. Develop, maintain, and implement procurement procedures.
2. Conduct vendor prequalification and maintain the Qualified Vendor List (QVL).
3. Develop Project Procurement Plan in accordance with project requirements and schedules.
4. Identify procurement risks and develop mitigation strategies considering market volatility, material price escalation, and project complexity.
5. Prepare commercial inquiries, tender packages, and bid documents for subcontractor work scopes.
6. Execute strategic sourcing, procurement, and purchasing activities for project materials, equipment, and subcontracted services.
7. Conduct detailed Commercial Bid Evaluations (CBE) and bid clarifications for subcontractors and vendors.
8. Prepare and present commercial evaluations and cost breakdowns to higher management during bid review and award recommendations.
9. Lead commercial negotiations with vendors and subcontractors.
10. Prepare Purchase Orders (POs) and draft Subcontract Agreements in accordance with company procedures.
11. Ensure all procured materials, equipment, and services comply with Purchase Order specifications, quality requirements, and contractual obligations.
12. Develop expediting plans and monitor vendors' manufacturing progress to ensure compliance with project schedules.
13. Monitor and expedite Purchase Orders throughout the procurement cycle, including engineering, material procurement, fabrication, assembly, inspection, testing, and shipment.
14. Identify potential delivery delays and implement corrective actions to minimize impacts on project schedules.
15. Support claims, variation orders, and commercial discussions related to procurement and subcontracting.
16. Maintain complete procurement records and documentation for audit and project close-out.
17. Drive Value Engineering initiatives in collaboration with Engineering and Project teams to optimize cost without compromising quality, safety, or project requirements.
Qualifications, Skills and Competencies:
1. Bachelor’s degree in engineering or related discipline.
2. Minimum of 9 years of experience in project procurement and expediting within EPC projects.
3. Minimum of 3 years of experience in cost estimating for Civil, Mechanical, Electrical, and Instrumentation disciplines, preferably in the Oil & Gas, Power Plant, Industrial, or Infrastructure sectors will be an advantage.
4. Good understanding of Civil, Mechanical, Electrical, and Instrumentation engineering principles.
5. Good understanding of project planning, scheduling, procurement, and cost control.
6. Strong knowledge of procurement processes, contract administration, and commercial practices in EPC projects.
7. Strong leadership, coordination, and mentoring skills.
8. Excellent analytical, negotiation, and problem-solving skills.
9. Strong interpersonal and communication skills with a professional attitude, attention to detail, and the ability to work effectively under pressure.
10. Proficient in both written and spoken English.
Fire Protection Check Engineer
Duties and Responsibilities:
1. Collaborate with the Lead Engineer to align the design scope and objectives.
2. Review project requirements, technical specifications, and applicable codes and standards, and participate in design reviews and quality assurance processes to ensure compliance.
3. Support project planning and execution by engaging in relevant meetings, performing necessary quality assurance and design verification activities.
4. Develop philosophies and specifications for fire protection systems (active/passive).
5. Develop and review engineering documents, including piping and instrumentation diagrams (P&IDs), fire water demand, fire protection layout drawings, fire alarm layout drawings, fire protection equipment specifications and datasheets.
6. Conduct hydraulic calculation using PIPENET software.
7. Prepare technical requisition and bid evaluation.
8. Collaborate with multidisciplinary engineering teams, including mechanical, piping, electrical, instrumentation and control, to achieve fully integrated system design and execution.
9. Contribute to the preparation of technical input during bidding activities and support execution to meet defined timelines and cost targets.
10. Provide technical input and support throughout procurement, construction, and commissioning phases.
11. Assist in testing and commissioning activities, including site visits and surveys, and provide technical support during construction by addressing site queries and reviewing on-site conditions.
12. Proactively identify technical issues and risks and take both corrective and preventive actions to resolve and mitigate them.
13. Contribute to continuous improvement within the discipline and organization, including development of work instructions, design guidelines, and value engineering initiatives.
Qualifications, Skills and Competencies:
1. Bachelor’s degree in chemical engineering, mechanical engineering, or related discipline.
2. Minimum of 6 years of experience in engineering consultant or EPC contractor.
3. Experience in bidding activities is an advantage.
4. Experience in FEED is an advantage.
5. Good understanding of engineering practices and relevant safety design codes (e.g., NFPA, SNI, etc.).
6. Ability to prepare design basis, Piping and Instrumentation Diagrams (P&ID), and specifications for fire protection systems.
7. Good knowledge for fire pump selection.
8. Proficient in PIPENET Vision software.
9. Excellent problem-solving and analytical skills.
10. Strong interpersonal skills with strong attention to detail.
11. Proficient in English, both written and verbal.
12. Willing to be dispatched overseas or domestic sites for project support if required.
Mechanical Rotary Check Engineer
Duties and Responsibilities:
1. Collaborate with the Mechanical Lead Engineer to align the design scope and objectives.
2. Review project requirements, technical specifications, and applicable codes and standards, and participate in design reviews and quality assurance processes to ensure compliance.
3. Support project planning and execution by engaging in relevant meetings, performing necessary quality assurance and design verification activities.
4. Carry out engineering design for various mechanical rotary equipment such as pumps, compressors, agitators, fans, blowers, etc.
5. Develop and review engineering documents, including specifications, datasheets, and other design documents, as part of project design and documentation requirements.
6. Prepare technical requisition and bid evaluation.
7. Review and comment on vendor’s documents.
8. Collaborate with multidisciplinary engineering teams, including process, piping, electrical, civil, instrumentation and control, to achieve fully integrated system design and execution.
9. Contribute to the preparation of technical input during bidding activities and support execution to meet defined timelines and cost targets.
10. Provide technical input and support throughout procurement, construction, and commissioning phases.
11. Assist in testing and commissioning activities, including site visits and surveys, factory acceptance test, and provide technical support during construction by addressing site queries and reviewing on-site conditions.
12. Proactively identify technical issues and risks and take both corrective and preventive actions to resolve and mitigate them.
13. Contribute to continuous improvement within the discipline and organization, including development of work instructions, design guidelines, and value engineering initiatives.
Qualifications, Skills and Competencies:
1. Bachelor’s degree in mechanical engineering.
2. Minimum of 6 years of experience in engineering consultant or EPC contractor.
3. Experience in bidding activities is an advantage.
4. Experience in FEED is an advantage.
5. Good understanding of mechanical engineering fundamentals.
6. Strong knowledge of engineering practices and relevant design codes, such as ASME, API, ANSI, etc.
7. Able to prepare Mechanical Datasheets, Specifications etc. and complete Technical Bid Evaluations for rotating equipment.
8. Proficient in AutoCAD.
9. Excellent problem-solving and analytical skills.
10. Strong interpersonal skills with strong attention to detail.
11. Proficient in English, both written and verbal.
12. Certificate of Competence with qualification Associate Expert in Mechanical Engineering (optional).
13. Willing to be dispatched overseas or domestic sites for project support if required.
Geotechnical Check Engineer
Duties and Responsibilities:
1. Having capable of providing assessment and management data regarding soil condition for the project.
2. Having capable of providing scope of work, technical specifications for soil investigation Work Activity.
3. Having capable of providing pile bearing capacity for shallow and deep foundation (Allowable pile compression capacity, Allowable pile lateral capacity and Allow pile tension capacity, conduct slope stability).
4. Having Capable to analysis and recommend best soil improvement, Ensure compliance with Indonesian regulations and international standards.
Qualifications, Skills and Competencies:
1. Bachelor’s or master’s degree in Civil Engineering with a specialization in Geotechnical Engineering.
2. Minimum 6 - 8 years’ experience in geotechnical engineering, preferably in Geotechnical Consultant or EPC.
3. Proficiency with geotechnical software such as Plaxis 3D & 2D, Ensoft Group, and any other geotechnic software.
4. Strong analytical and technical reporting skills.
5. Excellent communication and teamwork abilities.
6. Willingness to travel to sites when required.
7. Mastering soil mechanics, foundation engineering, and other geotechnical Structure designs (Deep & shallow foundation, slope stability, excavation support, Retaining wall, Underground structure, etc)
8. Familiarity with design codes and standards such as SNI, IBC, ASCE 7, AISC, ASTM and ACI 318.
9. A certificate of competence with qualification Associate Expert in Geotechnical Engineer is preferred.
10. Professional manner, consistent, and detail oriented.
11. Proficient in English, both written and verbal.
Additional Requirements:
For Geotechnical Check Engineer level:
1. Own the ability to lead basic design, detailed design and check calculation.
2. Provide technical advice on safe designs and construction.
3. Administer contracts and manage projects.
4. Take charge of control design schedule/progress within the responsible scope of work.
5. To be responsible for the checker position of at least two completed EPC projects (medium to large scale).
Please send your CV and latest portfolio to: y2022hr1@ptctci.id
(Subject format: Recruitment_Position_Name)
Only candidates who meet the qualifications will be processed further and this vacancy is open to Indonesian citizens only.