Eni Indonesia; 4 Positions

Eni is a global energy company headquartered in Italy, with a presence in Indonesia dating back to 1968. Today, Eni is among the country’s leading natural gas suppliers, with operations spanning exploration, development, and production, particularly in the deepwater areas of the Kutei Basin in the Makassar Strait. The company’s strategy is centered on the development of an integrated offshore gas hub, leveraging existing infrastructure to accelerate time-to-market and optimize investments.

We are looking for qualified personnel with high motivation, initiative, and integrity to fill the following position:

Job Title: Control Room Operator

Purpose:

The Control Room Operator is to operate and maintain processing gas & condensate in the ORF facilities complex in Control Room through established procedures to produce gas & condensate from Onshore/KNH facilities and deliver to East Kalimantan facilities in safe operation, efficiently and within environment and contractual limits.

Control Room Operator also operate, and handling emergency Shut down system, surveillances equipment, utility systems and equipment in safe operations. Control Room Operator also must capture all alarm system include mitigation to be done and manage coordination with field operator & maintenance team to maintain safety, production quality and plant availability.

Control Room Operator (CRO) will communicate with Onshore/KNH Control Room operators & East Kalimantan parties including but not limited to the Badak Control Room, in any changes of production operation parameter and condition in ORF, particularly during emergency situation until the production re-start in safely & timely manner. In addition, CRO will also liaise with Field Operator, Maintenance Team, Site Support team including but not limited to the Security, Housekeepers, Grass cutter, Project Representatives for any operational support required.

Control Room Operator will work closely with Field Operator and ensures that hydrocarbon production moves continuously from the inlet ORF to the tie-in export facilities within operational context and part of all Front-Line Operations Production & Maintenance.

General Accountabilities and Responsibilities:

• Perform regular routine checks on all equipment and units to ensure they function according to Standard Operating Procedures (SOPs).

• Ensure the efficiency of production facilities.

• Adhere to all safety and environmental protection procedures.

• Manage the startup and shutdown of process facilities to ensure safe operation and compliance with procedures to meet product requirements.

• Plan the work activities of production operators during their shifts.

• Ensure facilities and work areas are in a safe condition for the execution of maintenance and project activities under valid work permits.

• Verify that fire and gas detection systems, emergency systems, and surveillance equipment are functioning properly.

• Operate and maintain production operation parameters (Pressure, Temperature, hydrocarbon quality, etc.), UPS and battery systems, Main generators, and emergency diesel generators with their utility support systems.

• Operate and maintain gas and condensate metering systems and other utility equipment to support production availability and reliability at the ORF.

• Operate and maintain gas and condensate system units, ensuring qualities meet agreed specifications and nominations.

• Monitor production and resolve operational problems by working closely with all relevant teams to maintain optimal performance.

• Maintain data logbooks, gather information, and analyse data from process facilities.

• Utilize experience and knowledge to lead or participate in investigations and the rectification of operational problems.

• Troubleshoot minor operational issues and report major problems to management.

• Produce comprehensive and accurate shift and crew-change handover notes.

• Ensure that Permit to Work (PTW) activities are carried out according to safety procedures.

• Mentor field operators on DCS operations to facilitate knowledge transfer.

• Record bypass and override process parameters as per BIFO procedures.

• Understand multi-disciplinary risk assessments and execute mitigation plans for bypassed or overridden signals; ensure the Central Control Room (CCR) is aware of required emergency actions.

• Minimize production losses by ensuring safe procedures and execution.

• Ensure the production plant, processes, and equipment are working efficiently.

• Perform routine checks of all equipment and units to ensure they function correctly in accordance with standard operating procedures (SOPs).

• Maintain plant log sheets to ensure process parameters are within safe limits and report any abnormalities to the Operation Supervisor.

• Participate actively in shift handover meetings to ensure current conditions are communicated clearly to the entire team.

• Manage and monitor process facilities during pigging activities.

• Record and report equipment abnormalities and problems via SAP Notifications and formal communication protocols to the reporting line (Leader, Supervisor, OIM).

Health, Safety, Environment and Quality (HSEQ):

• Comply with rules and standards described in Company Policies, HSE Integrated Management System and Procedures

• Report all incidents.

• Motivate staff and colleagues to comply with HSE rules and standards.

• Participate in HSE related initiatives.

Qualifications & Experience:

- Education: Diploma (D3) in Engineering or equivalent

- Professional Qualification:

• 7 years’ experience of Oil & Gas industry

• 7 years as Operator including 1 year at Control Room

• Control Panel Operator experiences is advantage

- Training and Certification:

• Employee Induction including HSE Awareness

• T-BOSIET (1st time) or T-FOET (refreshment)

• SAP PM Modules

• Control Room Emergency Training (MOME)

• Authorization Gas Tester (AGT)

• First Aid & Fire Fighting

• Other training might be required to support operational duty

• BNSP-certified candidates are highly preferred

- Language: Fluent in English and Bahasa Indonesia

Required Competencies

Technical Competencies:

- Knowledge of subsea system, oil & gas processing facilities, MRU operational, Hull & utilities and operations desired

- Pre-commissioning, commissioning and start-up experienced

- Ability to conduct Operations Process upset – Troubleshooting in field facilities

- Production Operations: Plant Management, Plant Prod Optimization

- Maintenance Operations: Trouble shooting techniques knowledge

- Supports and technologies: Technical requirement and Standard

- Compliance: Health, Safety, Environment, Quality

Non-Technical Competencies:

- Integrity & values

- Value Creation Focus

- Teamwork & cooperation

- Initiative

- Analytical thinking

- Eager to Learn

- Concern for order

- Self-confidence

- Team player

Working Conditions:

Rotational Base (Onshore/KNH)

Job Title: Lead Instrument & Automation Technician

Purpose:

The Lead Instrument & Automation Technician is responsible for providing technical advice, support, and troubleshooting to maximize the operations’ efficiency of Eni's facilities.  Lead Instrument & Automation Technician activities will be conducted in safe manner with maximizing field production efficiency while minimizing the total maintenance cost (production downtime, spare parts, manpower, etc.).

The Lead Instrument & Automation Technician is responsible for all maintenance and repair activity of all process instrumentation equipment and process control maintenance of the hydrocarbon process system and all common process and utilities instrumentation equipment at the ORF so that they will respond to automatic or remote controls and perform their function to design specifications.

The Lead Instrument & Automation Technician is responsible for supervising the gathering and accurately recording preventive maintenance, information, initiating work orders, material regulations and equipment failure reports.

The Lead Instrument & Automation Technician should have the ability to write malfunction reports, status reports, provide recommendations that will resolve problems quickly and at minimum expense and conducting Root Cause Analysis (RCA) of each Failures, motivate subordinate to work safely, hold / attend and participate in safety meetings, maintain good housekeeping in his workplace.

 

To manage respective people and organization with relevant administration and report, also managing HSE function in the respective department.

General Accountabilities and Responsibilities:

• Provide instrumentation automation engineering and maintenance support to Operations and Maintenance teams.

• Proactively identify and develop ideas for improvements to the Instrumentation and Automation system that can add value to the asset.

• Provide instrumentation and automation system input and support to future field development.

• Engineer and design instrumentation and automation modifications to production, onshore facilities.

• Design and create new configuration and logic for additional process control system to support overall improvement.

• Perform installation, reparation and troubleshooting of instrumentation and automation equipment.

• Participate in Root Cause Analysis for significant equipment failures.

• Develop operating procedures and guidelines.

• Ensure sufficient spare parts at ORF warehouse as well as at shore base warehouse.

• Create, review, approve maintenance notifications and performing the verification of each outstanding maintenance notifications, review & plan maintenance orders, and inputting accurate technical data by utilizing an integrated Computerized Maintenance Management System (SAP) provided by the company based on the assigned roles and authorizations.

• Provide training/presentation to share knowledge and information on Instrumentation and automation and Assesses performance of all his subordinates, determines training needs and checks completed work to ensure that the intended result have been achieved.

• Demonstrate appropriate safety behaviours and commitment to environmental policies.

• Using experience and knowledge to lead investigate and rectify equipment operational problems.

• Ensure appropriate risk assessments are carried out for all electrical and instrumentation activities, with particular attention to recognize the impact of change.

• Apply the lessons learned from design reviews, receiving inspections, and risk management findings and support team performance by sharing knowledge and best practices.

• Ensure the confidentiality of the company's documentation.

Health, Safety, Environment and Quality (HSEQ):

• Comply with rules and standards described in Company Policies, HSE Integrated Management System and Procedures

• Report all incidents.

• Motivate staff and colleagues to comply with HSE rules and standards.

• Participate in HSE related initiatives.

Qualifications & Experience:

- Education: Bachelor Degree in Engineering or equivalent

- Professional Qualification:

• Minimum 5 years of Oil & Gas Industry experience

• Minimum 5 years’ Experience in the use of application of instrumentation and automation simulation software

- Training and Certification:

• Employee Induction including HSE Awareness

• T-BOSIET (1st time) or T-FOET (refreshment)

• Coxswain Lifeboat

• Basic Fast Rescue Craft Coxswain Course

• Advance Fire Fighting

• Radioactive Source Security Officer (PKSR)

• Radiation Protection Officer (PPR)

• Occupational Health Safety Administration Series (OHSAS)

• BNSP-certified candidates are highly preferred

- Language: Fluent in English and Bahasa Indonesia

Required Competencies

Technical Competencies:

- Proficient in operation of Gas Turbines and generators including support packages and ancillary equipment.

- Ability to use and develop PLC, DCS and SCADA systems.

- Knowledge of gas plant and onshore operations.

- Extensive experience and exposure to Root Cause Analysis and troubleshooting of operational equipment with state-of-the-art diagnostic techniques.

- Experience in the design, installation, commissioning, and operations of electrical, instrumentation, automation, and metering.

- Pre-commissioning, commissioning, and start-up experience.

- Production Operations: Maintenance Management, Predictive Maintenance,

- Operation/Maintenance Advising.

- Maintenance Engineering: CMMS Activities, Maintenance Engineering, Maintenance System Auditing, Maintenance Advising in Project Phase, Reliability/Availability. Analysis techniques knowledge, Maintenance systems and policies knowledge.

- Organization Processes: Internal Standard, Feedback development and diffusion

- Technical Audit and Design review, Documentation Management.

- Support and Technologies: Standard ISO, TQM and Quality System, Technical requirement and Standard.

- Compliance: Local/National and International Standard and Codes, Health, Safety, Environment, Quality.

- Capable in terms of the maintenance management of Oil & Gas Platforms Onshore receiving Processing Facility.

Non-Technical Competencies:

- Integrity & values

- Driving for results

- Value Creation Focus

- Teamwork & cooperation

- Initiative

- Analytical thinking

- Information seeking

- Concern for order

- Self-confidence

Working Conditions:

Onshore based (Onshore/KNH)

Job Title: Lead Mechanical

Purpose:

The Lead Mechanical Technician is responsible for ensuring that operating parameters for all Mechanical equipment at the Eni’s Jangkrik facilities are operating within design limits and that any abnormalities are communicated and assessed immediately.

The Lead Mechanical Technician is guaranteeing the prompt, safe and environment respecting execution of Maintenance activities will conduct in safe manner with maximizing uptime and field production efficiency while minimizing the total maintenance cost (production downtime, spare parts, man power, etc.) and meet daily production targets whilst complying with company guidelines and legal requirements to deliver highest value to stakeholders without compromise to Safe Operating Principals.

General Accountabilities and Responsibilities:

• Ensure all relevant Mechanical equipment is fully operational, in service, maintained safely, effectively and in accordance with procedures and equipment design codes and standards.

• Ensure maintenance activities are carried out in compliance with all relevant procedures and legal requirements.

• Ensure that all Safety Critical element PM’s are completed with plan.

• Ensure all work is coordinated and aligned with production priorities and within the issued job plan and schedules, including reporting by the scheduler from the CMMS.

• Liaise with Scheduler with regard to the forward planning of spare parts deliverability and in determining min/max stock levels of spare parts and maintenance consumables on the facility.

• Maintain complete and accurate equipment history records within the Computerized Maintenance Management System.

• Apply the lessons learned from design reviews, receiving inspections, and risk management findings and support team performance by sharing knowledge and best practices.

• Conduct and coordinate Mechanical maintenance contractors (if any) inspections and calibrations, function tests and evaluate Mechanical equipment operation and condition to determine remedial action.

• Prepare maintenance activities for flawless execution, ensuring permits, PPE, tools, materials, equipment, work site preparation, and toolbox talks are in place and completed at all times.

• Manage relevant reporting and administration work based on the needs of the respective organization (including data recording, correspondence, etc. – based on the function of this position).

• Produce comprehensive and accurate shift and crew change handover notes.

• Ensure that any changes to Mechanical controlled documentation, as a result of MOC (Management of Change) work, are captured and correctly recorded.

• If required, attend Emergency work after normal working hours on a callout basis.

• Participate in Root Cause Analysis for equipment failures

Health, Safety, Environment and Quality (HSEQ):

• Comply with rules and standards described in Company Policies, HSE Integrated Management System and Procedures

• Report all incidents.

• Motivate staff and colleagues to comply with HSE rules and standards.

• Participate in HSE related initiatives.

Qualifications & Experience:

- Education: Diploma (D3) in Mechanical Engineering or similar

- Experience:

• 10 years of Oil & Gas Industry experience

- Training and Certification:

• Employee Induction including HSE Awareness

• T-BOSIET (1st time) or T-FOET (refreshment)

• Advance Fire Fighting

• CSEA (Confined Spaces Entrant Attendant)

• BNSP-certified candidates are highly preferred

- Language: Fluent in English and Bahasa Indonesia

Required Competencies

Technical Competencies:

- Extensive experience and exposure with a variety of Mechanical equipment and manufacturers

- Good knowledge of production facilities in an oil/gas including installation, repair testing and maintenance of wide range of Mechanical systems.

- Must have the ability to read and understand drawings and specifications specific to Mechanical discipline, e.g. P&ID, vendor control drawings, etc.

- Extensive experience and exposure with hazardous areas and hazardous area equipment certification.

- Extensive experience and exposure with standard operating practice with respect to maintenance activities in an operational Oil & Gas production/processing environment, with specific regard to hazardous area practise and restrictions.

- Extensive experience and exposure with Maintenance Management system CMMS-SAP

- Extensive experience and exposure with hazard associate with Manual handling and operation maintenance requirements of fixed and mobile lifting equipment, including onshore cranes and inspection requirements under design code API 2C.

- Extensive experience and exposure with maintenance requirements and hazards of high pressure piping systems, valve types, and flange management.

- Extensive experience and exposure with levelling and alignment rotating equipment.

- Extensive experience and exposure with operation and maintenance of industrial single & double fuel Gas Turbines and the installation and removal of compressor dry gas seals.

- Extensive experience and exposure with operation and maintenance of HVAC systems.

- Extensive experience and exposure with operation and maintenance of centrifugal compressors, centrifugal pumps, air compressors and dryers, fin fan air coolers, pedestal cranes, diesel engine drivers, and utility packages.

- Extensive experience and exposure with use of hydraulic and pneumatic bolt torque and tensioning equipment.

- Extensive experience and exposure with standard operating practice with respect

- to maintenance activities in an operational oil & gas production/processing environment, with specific regard to hazardous area practices and restrictions.

- Extensive experience and exposure to root cause analysis and troubleshooting of operational equipment with state of the art diagnostic techniques

Non-Technical Competencies:

- Integrity & values

- Driving for results

- Value Creation Focus

- Teamwork & cooperation

- Initiative

- Analytical thinking

- Information seeking

- Concern for order

- Self-confidence

- Team player

Working Conditions:

Onshore/KNH – Rotational Based

Job Title: Metering Technician

Purpose:

The Metering Technician is responsible to ensure that operating parameters for all metering equipment at Eni’s onshore facilities are operating within design limits and that any abnormalities are communicated and assessed immediately. Supervise and coordination routine validation test of Metering System with government (Ditjen MIGAS, SKK MIGAS, and any other relevant functions) to get approval of overall system.

Metering Technician guarantee the prompt, safe and environment respecting execution of all Maintenance activities that will be conducted in safe manner with maximizing uptime and field production efficiency while minimizing the total maintenance cost (production downtime, spare parts, man power, etc). Meet daily production targets whilst complying with company guidelines and legal requirements to deliver highest value to stakeholders without compromise to safe operating principals.

General Accountabilities and Responsibilities:

• Provide metering support to operations and maintenance teams to ensure all relevant metering equipment is operational, in service, maintained safely, effectively and in accordance with procedures and equipment design codes and standards.

• Complete the plan and breakdown maintenance to flow metering & associated instrumentation at onshore locations in Eni’s facilities.

• Campaign maintenance on oil/gas Fiscal Metering and Allocation Metering systems.

• Support annual metering system re-certification activities per SKK Migas’s PTK062

• Support safe start up and shutdown of process facilities. Assist operator to ensure safe start up and shutdown of process facilities.

• Liaise with direct superior and operations personnel to ensure all work is co-coordinated and aligned with production priorities and within the job plan & schedules issued include reporting by the Planner from the CMMS. Maintain complete and accurate equipment history records within the Computerized Maintenance Management System.

• Liaise with CCRO Operator, Operation Supervisor, Operator Technician and Field Operator to early capture any operation anomalies and abnormality.

• Perform control system daily check and database backup base on planned schedule. Liaise with Planner & Scheduler with regard to the forward planning of spare parts deliverability and in determining minimum/maximum stock levels of spare parts and maintenance consumables on the facility.

• Conduct and coordinate contractor related to metering system & relevant contractors to inspections Control equipment operation and condition to determine remedial action.

• Carry out risk assessments for all high-risk activities, with particular attention to recognizing the impact of change.

• Prepare metering activities for flawless execution, ensuring permits, PPE, tools, materials, equipment, work site preparation, toolbox talks, are in place and completed at all times.

• Ensure compliance with Operating Policies and Procedures, EHS requirements and initiatives.

• Proactively to identify and develop ideas for improvements to the metering system that can add value to the asset.

• Assist Operation team during custody transfer & report review.

• Provide operations metering engineering input and support to future field development.

• Focal point of MOC Implementation & review related to metering system. Ensure that any changes to metering controlled documentation, as a result of MOC (management of Change) work, are captured and correctly recorded.

• Participate in Root Cause Analyses for significant equipment failures as required.

• Develop operating procedures and guidelines related to metering system.

• To provide all preliminary data (Trending, event, historian, screen grab, etc.) for each Loss Production report.

• Carry out major services, overhauls and breakdown maintenance on equipment responsible for as well as scheduled planned and corrective maintenance for optimal reliability and performance of equipment.

• Apply the lessons learned from design reviews, receiving inspections, and risk management findings and support team performance by sharing knowledge and best practices.

• Manage relevant reporting and administration work based on the needs of the respective organization (including data recording, correspondence, etc. based on function of this position).

• Ensure the confidentiality of the company’s documentation.

• Supervision & site commissioning of newly installed fiscal metering up grade and execute all Managed Fiscal Metering Audits.

• Communicate with the pipeline operators as required to ensure contract obligations were adhered.

• Update calibration procedures and Maintenance Management of Allocation & Fiscal metering.

• Manage EHS function in respective departments and Onshore Emergency Response Team member.

• Manage discipline technicians and vendor personnel.

• Coordinate and execute maintenance activities and tasks as per issued plan.

• Awareness of external support resources to assist the work plan execution; identify & liaise with vendor or contact person that can provide required capability.

• Support Project Development activities related to Eni’s Project – Production aspects relevant to onshore with focus on detail engineering involvement, construction, commissioning and maintenance issues of new oil/gas production facilities. Support to ensure that pre-commissioning, commissioning phase and start-up operations of facilities are conducted in safe, effective and efficiently manner with meeting the company target and to the satisfaction of all parties.

Health, Safety, Environment and Quality (HSEQ):

- Comply with rules and standards described in Company Policies, HSE Integrated Management System and Procedures

- Report all incidents

- Motivate staff and colleagues to comply with HSE rules and standards

- Participate in HSE related initiatives

Qualifications & Experience:

- Education: Diploma (D3) certificate as minimum in Instrumentation, Electrical or Metering  background

- Professional Qualification:

• Minimum 5 years’ experience in Oil and Gas Project experience

• Minimum 5 years in Oil & Gas industries with experience in metering system position or metering integrator

• Minimum 5 years’ experience of working with contractors in engineering activities

• Experience in Project Engineering in a major Oil & Gas company

- Training and Certification:

• Metering related training/certification

• BNSP-certified candidates are highly preferred

- Language: Fluent in English and Bahasa Indonesia

Required Competencies

Technical Competencies:

- Familiar in international standard for metering system (AGA, ISO,API)

- Hand on Troubleshooting in Metering system, meter prover & relevant field devices with Final control elements, DCS, PLC, and SCADA experiences are mandatory in this position.

- Deep knowledge in Process control system (PCS), OPC, ESD and Foundation Fieldbus is distinct advantage.

- Deep knowledge control of work system in Oil & Gas industries.

- Extensive experiences in Custody Metering System - Oil & Gas, Multiphase Flow Meter (MPFM), flow computer & Gas Chromatograph (GC) with ability to perform online program monitoring as an aid to fault diagnosis is highly desirable.

- Experience Process Control Network (PCN) with Microsoft Windows Client & Servers (networking system) and operating system.

- Knowledge of hazardous areas and hazardous area equipment certification. Experiences in developing procedure related with Automation and Control system.

- Extensive experience with a variety of instrumentation and control equipment and manufacturers of control valves, solenoid valves, instruments analyzer, transmitters, etc.

- Must have the ability to read and understand drawings and specifications specific to instrumentation discipline e.g. P&ID, Loop Diagrams, Junction box and marshalling cabinet schematic diagrams, cable block diagrams, vendor control drawings, etc.

- Good working knowledge of metering system operation and philosophies, including the ability to read and understand Cause & Effect matrices is essential.

- Good working knowledge of pneumatic and electronic field instruments & accessories related to metering system including transmitters, local gauges, meters, solenoid valves etc. The ability to fault diagnose and repair, calibrate and adjust as required is essential.

- Good knowledge of production facilities in an oil/gas or petrochemical industry and of installation, repair testing and maintenance of wide range of Multiphase metering system, instrumentation and control systems and Testing.

- Must be familiar with standard operating practice with respect to maintenance activities in an operational Oil & Gas production/processing environment, with specific regard to hazardous area practices and restrictions.

- Extensive experience and exposure to root cause analysis and troubleshooting of operational equipment with state of the art diagnostic techniques.

- Familiar to utilize CMMS / SAP

Non-Technical Competencies:

- Willing to work on rotation basis and assigned at any site

- Emergencies must be handled quickly and effectively. The incumbent must be able to demonstrate competence in emergency response as well as ability in supervising a team and problem solving.

- Willing to be appointed as a fire fighter team member as part of ORF ERT

- Knowledge of subsea system, ORF and operations desired.

- Having good sense of care, crisis, urgency and team player.

- Compliance: Local / National and International Standard, Codes and HSEQ.

- Capable in terms of the maintenance management of Oil & Gas Platforms Onshore Receiving Processing Facility.

Working Conditions:

(Onshore/KNH), Rotational Base

 

If you are interested in the position & meet the qualifications required, please send only your latest resume (in MS Word or PDF format with a size no more than 1 MB) to:

Recruitment.id@eni.com

Please mention the position title in the email subject: Apply for (position title)

Please note that applications may not be reviewed if received after 11 May 2026. Only shortlisted candidates will be notified.

Please be aware that Eni will never ask the applicant to pay any fee or appoint any travel agent for the selection process. All communications that ask the applicant to pay any fee or use a specific travel agent are fraudulent & scams. The application can only be sent through the above email.